FireCADCalc

Barometric Leg (Tail Pipe) Height

Minimum height of the barometric leg of a jet condenser from the condenser vacuum, local atmospheric pressure and water density, plus a safety margin.

Sugar mill and cogeneration

Inputs

Examples: 16 kPa at sea levelHill station

Results

Column balancing the vacuum8.0179m
Leg height with margin9.2179m

Download PDF CSV Link to this result Compare another case

Log in to save calculations to your dashboard.

Worked example

Example: 16 kPa at sea level. The inputs, in the units selected above:

InputValue
Condenser pressure (absolute)16.000 kPa
Atmospheric pressure101.33 kPa
Tail water density990.00 kg/m³
Safety margin1.0000 m

Applying the formula below gives:

ResultValue
Column balancing the vacuum8.7886 m
Leg height with margin9.7886 m

Open this example in the calculator and change any input.

Formula

\(H = \frac{p_a - p_c}{\rho g} + \Delta h\)

Variables

Symbol Meaning SI unit
\(p_c\) Condenser pressure (absolute) Pa
\(p_a\) Atmospheric pressure Pa
\(\rho\) Tail water density kg/m³
\(\Delta h\) Safety margin m
\(h_0\) Column balancing the vacuum m
\(H\) Leg height with margin m

Method and standards

Hydrostatics.

Where it is used

  • Condenser installation.
  • Retrofit checks.

Common mistakes

  • Gauge vacuum entered as absolute pressure.

Assumptions and limits

  • Static column only: no velocity head or friction. The margin must cover them; the Hugot barometric column calculator adds them explicitly, so it gives a taller column for the same case.

References

  • Hydrostatics h = (p_a − p_c)/(ρ g)

Questions and answers

Why about 10 m?

A full vacuum balances about 10.3 m of water at sea level.

Why a margin?

Velocity head, friction and surges must not let water rise into the condenser.

At altitude?

Lower atmospheric pressure shortens the column needed.

Method and article reviewed by FireCAD engineering on 13 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.

Free engineering calculators: every page computes in SI and converts to your units. Results are for engineering estimation; verify critical designs against the referenced standards.

Rejoining the server...

Rejoin failed... trying again in seconds.

Failed to rejoin.
Please retry or reload the page.

The session has been paused by the server.

Failed to resume the session.
Please retry or reload the page.