FireCADCalc

Balancing Several Rotating Masses in One Plane

Unbalance of up to four masses rotating in one plane, and the balancing mass and its angle at a chosen radius, by vector sum of m·r.

Thermal power plantProcess steam and utilitiesSugar mill and cogenerationChemical and fertiliserPulp and paperFood, dairy and textile

Inputs

Examples: Three masses at 0°, 60°, 150°Four masses

Results

Static (single-plane) balance only; masses in different planes also need a couple balance (two-plane method).

Resultant unbalance3.2046kg·m
Balancing mass16.023kg
Angle of the balancing mass243.07°
Unbalanced force before balancing79.070kN

Download PDF CSV Link to this result Compare another case

Log in to save calculations to your dashboard.

Worked example

Example: Three masses at 0°, 60°, 150°. The inputs, in the units selected above:

InputValue
Mass 112.000 kg
Radius 10.20000 m
Angle 10 °
Mass 28.0000 kg
Radius 20.25000 m
Angle 260.000 °
Mass 315.000 kg
Radius 30.15000 m
Angle 3150.00 °
Mass 4 (0 = none)0 kg
Radius 40.20000 m
Angle 4240.00 °
Radius of the balancing mass0.20000 m
Speed (for the unbalanced force)1,500.0 rpm

Applying the formula below gives:

ResultValue
Resultant unbalance3.2046 kg·m
Balancing mass16.023 kg
Angle of the balancing mass243.07 °
Unbalanced force before balancing79.070 kN

Open this example in the calculator and change any input.

Formula

\(\vec U = \sum m_ir_i\angle\theta_i, \quad m_b = \frac{|\vec U|}{r_b}, \quad \theta_b = \angle(-\vec U), \quad F = |\vec U|\omega^2\)

Variables

Symbol Meaning SI unit
\(m_1\) Mass 1 kg
\(r_1\) Radius 1 m
\(\theta_1\) Angle 1 rad
\(m_2\) Mass 2 kg
\(r_2\) Radius 2 m
\(\theta_2\) Angle 2 rad
\(m_3\) Mass 3 kg
\(r_3\) Radius 3 m
\(\theta_3\) Angle 3 rad
\(m_4\) Mass 4 (0 = none) kg
\(r_4\) Radius 4 m
\(\theta_4\) Angle 4 rad
\(r_b\) Radius of the balancing mass m
\(N\) Speed (for the unbalanced force) 1/s
\(U\) Resultant unbalance (kg·m) -
\(m_b\) Balancing mass kg
\(\theta_b\) Angle of the balancing mass rad
\(F\) Unbalanced force before balancing N

Method and standards

Vector sum of unbalances.

Where it is used

  • Fan, pulley and rotor balancing design.
  • Teaching.

Common mistakes

  • Ignoring masses in other planes.
  • Mixing degrees and radians.

Assumptions and limits

  • Rigid rotor; one plane.
  • The resultant unbalance is in kg·m in every unit system.
  • When the masses already balance, the angle of the balancing mass is not applicable and is not shown.

References

  • Rattan
  • Theory of Machines
  • 4th ed. (McGraw-Hill, 2014); Bhandari
  • Design of Machine Elements
  • 4th ed. (McGraw-Hill, 2017) (balancing of rotating masses in one plane)

Questions and answers

Why use m·r?

Centrifugal force is m·r·ω²; at one speed, balancing the vector sum of m·r balances the forces at all speeds.

Where does the balance mass go?

Opposite the resultant unbalance, at the chosen radius.

What do the defaults represent?

Three masses at 0°, 60° and 150° on a rotor turning at 1,500 rpm.

Method and article reviewed by FireCAD engineering on 13 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.

Related calculators

Free engineering calculators: every page computes in SI and converts to your units. Results are for engineering estimation; verify critical designs against the referenced standards.

Rejoining the server...

Rejoin failed... trying again in seconds.

Failed to rejoin.
Please retry or reload the page.

The session has been paused by the server.

Failed to resume the session.
Please retry or reload the page.