Worked example
Example: Three masses at 0°, 60°, 150°. The inputs, in the units selected above:
| Input | Value |
|---|---|
| Mass 1 | 12.000 kg |
| Radius 1 | 0.20000 m |
| Angle 1 | 0 ° |
| Mass 2 | 8.0000 kg |
| Radius 2 | 0.25000 m |
| Angle 2 | 60.000 ° |
| Mass 3 | 15.000 kg |
| Radius 3 | 0.15000 m |
| Angle 3 | 150.00 ° |
| Mass 4 (0 = none) | 0 kg |
| Radius 4 | 0.20000 m |
| Angle 4 | 240.00 ° |
| Radius of the balancing mass | 0.20000 m |
| Speed (for the unbalanced force) | 1,500.0 rpm |
Applying the formula below gives:
| Result | Value |
|---|---|
| Resultant unbalance | 3.2046 kg·m |
| Balancing mass | 16.023 kg |
| Angle of the balancing mass | 243.07 ° |
| Unbalanced force before balancing | 79.070 kN |
Open this example in the calculator and change any input.
Formula
\(\vec U = \sum m_ir_i\angle\theta_i, \quad m_b = \frac{|\vec U|}{r_b}, \quad \theta_b = \angle(-\vec U), \quad F = |\vec U|\omega^2\)
Variables
| Symbol | Meaning | SI unit |
|---|---|---|
| \(m_1\) | Mass 1 | kg |
| \(r_1\) | Radius 1 | m |
| \(\theta_1\) | Angle 1 | rad |
| \(m_2\) | Mass 2 | kg |
| \(r_2\) | Radius 2 | m |
| \(\theta_2\) | Angle 2 | rad |
| \(m_3\) | Mass 3 | kg |
| \(r_3\) | Radius 3 | m |
| \(\theta_3\) | Angle 3 | rad |
| \(m_4\) | Mass 4 (0 = none) | kg |
| \(r_4\) | Radius 4 | m |
| \(\theta_4\) | Angle 4 | rad |
| \(r_b\) | Radius of the balancing mass | m |
| \(N\) | Speed (for the unbalanced force) | 1/s |
| \(U\) | Resultant unbalance (kg·m) | - |
| \(m_b\) | Balancing mass | kg |
| \(\theta_b\) | Angle of the balancing mass | rad |
| \(F\) | Unbalanced force before balancing | N |
Method and standards
Vector sum of unbalances.
Where it is used
- Fan, pulley and rotor balancing design.
- Teaching.
Common mistakes
- Ignoring masses in other planes.
- Mixing degrees and radians.
Assumptions and limits
- Rigid rotor; one plane.
- The resultant unbalance is in kg·m in every unit system.
- When the masses already balance, the angle of the balancing mass is not applicable and is not shown.
References
- Rattan
- Theory of Machines
- 4th ed. (McGraw-Hill, 2014); Bhandari
- Design of Machine Elements
- 4th ed. (McGraw-Hill, 2017) (balancing of rotating masses in one plane)
Questions and answers
Why use m·r?
Centrifugal force is m·r·ω²; at one speed, balancing the vector sum of m·r balances the forces at all speeds.
Where does the balance mass go?
Opposite the resultant unbalance, at the chosen radius.
What do the defaults represent?
Three masses at 0°, 60° and 150° on a rotor turning at 1,500 rpm.
Method and article reviewed by FireCAD engineering on 13 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.