FireCADCalc

Pulley Block: Mechanical Advantage, Velocity Ratio and Efficiency

Mechanical advantage, velocity ratio and efficiency of a pulley block or tackle from the load, effort and number of supporting rope falls, with the effort needed.

Inputs

Examples: 10 kN on four falls, 96 % sheaves2 t chain block, 6 falls, 95 %Single fixed pulley, 98 %10 kN on four falls, 96 %, lead sheave

Results

The hauling line is taken straight off the last sheave of the falls; if it passes over a further (lead) sheave choose that option, which divides the efficiency by one more η_s.

Each sheave passes on η_s of the rope tension; the block efficiency is the average over the falls.

Efficiency of the block100.00%
Mechanical advantage η n1.0000
Effort W/MA1.0000kN
Ideal effort W/n1.0000kN

Download PDF CSV Link to this result Compare another case

Log in to save calculations to your dashboard.

Worked example

Example: 10 kN on four falls, 96 % sheaves. The inputs, in the units selected above:

InputValue
Load10.000 kN
Rope falls supporting the load (velocity ratio)4.0000 -
Efficiency per sheave96.000 %
Hauling linePulled straight off the last moving sheave

Applying the formula below gives:

ResultValue
Efficiency of the block94.158 %
Mechanical advantage η n3.7663
Effort W/MA2.6551 kN
Ideal effort W/n2.5000 kN

Open this example in the calculator and change any input.

Formula

\(VR = n, \quad \eta = \frac{1 - \eta_s^n}{n (1 - \eta_s)}\ \ (\times\,\eta_s \text{ with a lead sheave}), \quad MA = \eta\, VR, \quad P = \frac{W}{MA}\)

Variables

Symbol Meaning SI unit
\(W\) Load N
\(n\) Rope falls supporting the load (velocity ratio) -
\(\eta_s\) Efficiency per sheave -
\(\text{lead}\) Hauling line (straight off, or over a lead sheave) -
\(\eta\) Efficiency of the block -
\(MA\) Mechanical advantage η n -
\(P\) Effort W/MA N
\(P_i\) Ideal effort W/n N

Method and standards

Machine relations with sheave friction.

Where it is used

  • Hoisting tackle and chain blocks.
  • Mechanics examinations.

Common mistakes

  • Counting the hauling part as a fall.
  • Assuming 100 % efficiency.

Assumptions and limits

  • Equal sheave efficiency.
  • The falls carry P, P η_s, …, P η_s^(n−1). With the hauling line pulled straight off the last sheave a single fixed pulley shows 100 %; choose the lead-sheave option when the line passes over a further sheave.

References

  • Textbook mechanics (machines: MA = η VR; tackle efficiency (1 − ηⁿ)/(n(1 − η)) with sheave efficiency η)

Questions and answers

10 kN on four falls with 96 % sheaves?

Block efficiency 94.2 %, effort 2655 N instead of 2500 N.

What is velocity ratio?

Effort travel ÷ load travel: the number of supporting falls.

Why does efficiency drop with more falls?

Each extra sheave adds friction.

Method and article reviewed by FireCAD engineering on 12 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.

Related calculators

Free engineering calculators: every page computes in SI and converts to your units. Results are for engineering estimation; verify critical designs against the referenced standards.

Rejoining the server...

Rejoin failed... trying again in seconds.

Failed to rejoin.
Please retry or reload the page.

The session has been paused by the server.

Failed to resume the session.
Please retry or reload the page.