FireCADCalc

Gyroscopic Couple of a Spinning Rotor

Gyroscopic couple and bearing reaction when a spinning rotor such as a ship turbine or vehicle wheel precesses, from inertia, spin and precession.

Thermal power plantProcess steam and utilitiesSugar mill and cogenerationChemical and fertiliserPulp and paperFood, dairy and textile

Inputs

Examples: Ship turbine 200 kg·m², 3,000 rpmVehicle wheel 1.2 kg·m², 600 rpm, turn 0.3 rad/s

Results

Precession of a ship turning at radius R with speed V is ω_p = V/R; for pitching, use the maximum angular velocity of the pitching motion. Direction follows the right-hand rule.

Spin rate62.832rad/s
Gyroscopic couple0.022619kN·m
Bearing reaction from the couple0.015080kN

Download PDF CSV Link to this result Compare another case

Log in to save calculations to your dashboard.

Worked example

Example: Ship turbine 200 kg·m², 3,000 rpm. The inputs, in the units selected above:

InputValue
Polar moment of inertia of the rotor200.00 kg·m²
Spin speed3,000.0 rpm
Precession rate0.050000 rad/s
Bearing span2.0000 m

Applying the formula below gives:

ResultValue
Spin rate314.16 rad/s
Gyroscopic couple3.1416 kN·m
Bearing reaction from the couple1.5708 kN

Open this example in the calculator and change any input.

Formula

\(C = I\omega_s\omega_p, \quad R = \frac Cb\)

Variables

Symbol Meaning SI unit
\(I\) Polar moment of inertia of the rotor kg·m²
\(N\) Spin speed 1/s
\(\omega_p\) Precession rate, in rad/s (deg/s × π/180; rpm × π/30) -
\(b\) Bearing span m
\(\omega_s\) Spin rate (rad/s) -
\(C\) Gyroscopic couple N·m
\(R\) Bearing reaction from the couple N

Method and standards

Gyroscopic couple.

Where it is used

  • Marine and vehicle drive design.
  • Bearing load checks.

Common mistakes

  • Using rpm without converting to rad/s.
  • Missing the direction.

Assumptions and limits

  • Steady precession; symmetrical rotor.
  • ω_p is entered in rad/s in every unit system: multiply deg/s by π/180 or rpm by π/30.

References

  • Rattan
  • Theory of Machines
  • 4th ed. (McGraw-Hill, 2014); Bhandari
  • Design of Machine Elements
  • 4th ed. (McGraw-Hill, 2017) (gyroscopic couple C = Iωω_p)

Questions and answers

When does gyroscopic couple matter?

For heavy fast rotors whose axis turns: marine turbines, aircraft propellers, vehicle wheels in a turn, and grinding mills.

Which way does it act?

At right angles to both spin and precession axes, by the right-hand rule.

What do the defaults represent?

A 200 kg·m² turbine rotor at 3,000 rpm on a ship turning at 0.05 rad/s, bearings 2 m apart.

Method and article reviewed by FireCAD engineering on 13 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.

Related calculators

Free engineering calculators: every page computes in SI and converts to your units. Results are for engineering estimation; verify critical designs against the referenced standards.

Rejoining the server...

Rejoin failed... trying again in seconds.

Failed to rejoin.
Please retry or reload the page.

The session has been paused by the server.

Failed to resume the session.
Please retry or reload the page.