Worked example
Example: Ship turbine 200 kg·m², 3,000 rpm. The inputs, in the units selected above:
| Input | Value |
|---|---|
| Polar moment of inertia of the rotor | 200.00 kg·m² |
| Spin speed | 3,000.0 rpm |
| Precession rate | 0.050000 rad/s |
| Bearing span | 2.0000 m |
Applying the formula below gives:
| Result | Value |
|---|---|
| Spin rate | 314.16 rad/s |
| Gyroscopic couple | 3.1416 kN·m |
| Bearing reaction from the couple | 1.5708 kN |
Open this example in the calculator and change any input.
Formula
\(C = I\omega_s\omega_p, \quad R = \frac Cb\)
Variables
| Symbol | Meaning | SI unit |
|---|---|---|
| \(I\) | Polar moment of inertia of the rotor | kg·m² |
| \(N\) | Spin speed | 1/s |
| \(\omega_p\) | Precession rate, in rad/s (deg/s × π/180; rpm × π/30) | - |
| \(b\) | Bearing span | m |
| \(\omega_s\) | Spin rate (rad/s) | - |
| \(C\) | Gyroscopic couple | N·m |
| \(R\) | Bearing reaction from the couple | N |
Method and standards
Gyroscopic couple.
Where it is used
- Marine and vehicle drive design.
- Bearing load checks.
Common mistakes
- Using rpm without converting to rad/s.
- Missing the direction.
Assumptions and limits
- Steady precession; symmetrical rotor.
- ω_p is entered in rad/s in every unit system: multiply deg/s by π/180 or rpm by π/30.
References
- Rattan
- Theory of Machines
- 4th ed. (McGraw-Hill, 2014); Bhandari
- Design of Machine Elements
- 4th ed. (McGraw-Hill, 2017) (gyroscopic couple C = Iωω_p)
Questions and answers
When does gyroscopic couple matter?
For heavy fast rotors whose axis turns: marine turbines, aircraft propellers, vehicle wheels in a turn, and grinding mills.
Which way does it act?
At right angles to both spin and precession axes, by the right-hand rule.
What do the defaults represent?
A 200 kg·m² turbine rotor at 3,000 rpm on a ship turning at 0.05 rad/s, bearings 2 m apart.
Method and article reviewed by FireCAD engineering on 13 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.