FireCADCalc

Watt and Porter Governor: Height and Speed

Height of a Watt governor at a speed, and the speed range of a Porter governor between two heights from ball and sleeve masses.

Thermal power plantProcess steam and utilitiesSugar mill and cogenerationChemical and fertiliserPulp and paperFood, dairy and textile

Inputs

Examples: Porter 5 kg balls, 25 kg sleeve, 150–180 mmWatt at 60 rpm

Results

Frictionless, equal arm lengths, links meeting on the axis. Porter: N² = (m + M)/m × g/(4π²h).

Speed at h₁189.13rpm
Speed at h₂172.65rpm
Speed range16.479rpm

Download PDF CSV Link to this result Compare another case

Log in to save calculations to your dashboard.

Worked example

Example: Porter 5 kg balls, 25 kg sleeve, 150–180 mm. The inputs, in the units selected above:

InputValue
Governor typePorter (equal arms)
Speed (Watt height)75.000 rpm
Mass of each ball5.0000 kg
Central (sleeve) load25.000 kg
Lower height0.15000 m
Upper height0.18000 m

Applying the formula below gives:

ResultValue
Speed at h₁189.13 rpm
Speed at h₂172.65 rpm
Speed range16.479 rpm

Open this example in the calculator and change any input.

Formula

\(h_W = \frac{g}{\omega^2}, \quad N^2 = \frac{m + M}{m}\frac{g}{4\pi^2h}\ \text{(Porter)}\)

Variables

Symbol Meaning SI unit
\(\text{type}\) Governor type -
\(N\) Speed (Watt height) 1/s
\(m\) Mass of each ball kg
\(M\) Central (sleeve) load kg
\(h_1\) Lower height m
\(h_2\) Upper height m
\(h_W\) Watt governor height at N m
\(N_1\) Speed at h₁ 1/s
\(N_2\) Speed at h₂ 1/s
\(N_1 - N_2\) Speed range 1/s

Method and standards

Governor equilibrium.

Where it is used

  • Older steam engines and turbines.
  • Teaching mechanisms.

Common mistakes

  • Unequal arms with the equal-arm formula.
  • Ignoring friction at the sleeve.

Assumptions and limits

  • Frictionless; equal arms; h₁ below h₂.
  • The Watt height at N is shown for the Watt type only.

References

  • Rattan
  • Theory of Machines
  • 4th ed. (McGraw-Hill, 2014); Bhandari
  • Design of Machine Elements
  • 4th ed. (McGraw-Hill, 2017) (Watt and Porter governors)

Questions and answers

Why does a Porter governor run faster than a Watt?

The heavy central load adds to the gravity term, so the balls must spin faster at the same height; it is also more powerful.

Why is the Watt governor limited to slow speeds?

Its height falls with the square of speed; at a few hundred rpm it becomes too small to act.

What do the defaults represent?

A Porter governor with 5 kg balls and a 25 kg sleeve working between 150 and 180 mm height.

Method and article reviewed by FireCAD engineering on 13 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.

Related calculators

Free engineering calculators: every page computes in SI and converts to your units. Results are for engineering estimation; verify critical designs against the referenced standards.

Rejoining the server...

Rejoin failed... trying again in seconds.

Failed to rejoin.
Please retry or reload the page.

The session has been paused by the server.

Failed to resume the session.
Please retry or reload the page.