FireCADCalc

Direct Central Impact: Velocities After Collision

Velocities of two bodies after a direct central impact from masses, initial velocities and coefficient of restitution, with energy lost and impulse.

Thermal power plantProcess steam and utilitiesSugar mill and cogenerationChemical and fertiliserPulp and paperFood, dairy and textile

Inputs

Examples: 2 kg at 5 m/s, 3 kg at −1 m/s, e 0.6Plastic impact, e 0

Results

Momentum is conserved; e = 1 is perfectly elastic, e = 0 perfectly plastic (bodies move together). Impulse in N·s.

Velocity of 1 after-0.76000m/s
Velocity of 2 after2.8400m/s
Kinetic energy lost13.824J
Impulse on body 211.520N·s

Download PDF CSV Link to this result Compare another case

Log in to save calculations to your dashboard.

Worked example

Example: 2 kg at 5 m/s, 3 kg at −1 m/s, e 0.6. The inputs, in the units selected above:

InputValue
Mass 12.0000 kg
Velocity of 1 before5.0000 m/s
Mass 23.0000 kg
Velocity of 2 before-1.0000 m/s
Coefficient of restitution60.000 %

Applying the formula below gives:

ResultValue
Velocity of 1 after-0.76000 m/s
Velocity of 2 after2.8400 m/s
Kinetic energy lost13.824 J
Impulse on body 211.520 N·s

Open this example in the calculator and change any input.

Formula

\(v_1 = \frac{m_1u_1 + m_2u_2 - m_2e(u_1 - u_2)}{m_1 + m_2}, \quad v_2 = \frac{m_1u_1 + m_2u_2 + m_1e(u_1 - u_2)}{m_1 + m_2}\)

Variables

Symbol Meaning SI unit
\(m_1\) Mass 1 kg
\(u_1\) Velocity of 1 before m/s
\(m_2\) Mass 2 kg
\(u_2\) Velocity of 2 before m/s
\(e\) Coefficient of restitution -
\(v_1\) Velocity of 1 after m/s
\(v_2\) Velocity of 2 after m/s
\(\Delta E\) Kinetic energy lost J
\(J\) Impulse on body 2, in N·s N·s

Method and standards

Momentum and restitution.

Where it is used

  • Impact hammers, crushers and drop tests.
  • Teaching.

Common mistakes

  • Sign of velocities.
  • Applying it to oblique impact without resolving components.

Assumptions and limits

  • Direct central impact; smooth bodies; body 1 approaching body 2 (u₁ > u₂).
  • The impulse is always in N·s, whatever the unit system.

References

  • Meriam and Kraige
  • Engineering Mechanics: Dynamics
  • 8th ed. (Wiley, 2015)
  • ch. 3 (impact)

Questions and answers

What is the coefficient of restitution?

The ratio of separation speed to approach speed: about 0.9 for hardened steel balls, 0.5 for timber, near 0 for clay.

Where does the lost energy go?

Into heat, sound and permanent deformation.

What do the defaults represent?

A 2 kg body at 5 m/s meeting a 3 kg body moving the other way at 1 m/s, e = 0.6.

Method and article reviewed by FireCAD engineering on 13 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.

Related calculators

Free engineering calculators: every page computes in SI and converts to your units. Results are for engineering estimation; verify critical designs against the referenced standards.

Rejoining the server...

Rejoin failed... trying again in seconds.

Failed to rejoin.
Please retry or reload the page.

The session has been paused by the server.

Failed to resume the session.
Please retry or reload the page.