Worked example
Example: Efficiency 80 to 86 %. The inputs, in the units selected above:
| Input | Value |
|---|---|
| Old, reference or true value | 80.000 - |
| New or measured value | 86.000 - |
Applying the formula below gives:
| Result | Value |
|---|---|
| Change V₂ − V₁ | 6.0000 |
| Percentage change (V₂ − V₁) / |V₁| | 7.5000 % |
| Percentage error |V₂ − V₁| / |V₁| | 7.5000 % |
| Percentage difference |V₂ − V₁| / mean | 7.2289 % |
| Ratio | 1.0750 |
Open this example in the calculator and change any input.
Formula
\(\delta = \frac{V_2 - V_1}{|V_1|}, \quad \delta_{abs} = \frac{|V_2 - V_1|}{|V_1|}, \quad \delta_m = \frac{|V_2 - V_1|}{(|V_1| + |V_2|)/2}\)
Variables
| Symbol | Meaning | SI unit | ||||
|---|---|---|---|---|---|---|
| \(V_1\) | Old, reference or true value | - | ||||
| \(V_2\) | New or measured value | - | ||||
| \(\Delta V\) | Change V₂ − V₁ | - | ||||
| \(\delta\) | Percentage change (V₂ − V₁) / | V₁ | - | |||
| \(\delta_{abs}\) | Percentage error | V₂ − V₁ | / | V₁ | - | |
| \(\delta_m\) | Percentage difference | V₂ − V₁ | / mean | - | ||
| \(V_2/V_1\) | Ratio | - |
Method and standards
Standard definitions.
Where it is used
- Reporting savings and losses.
- Instrument checks.
- Efficiency improvements.
Common mistakes
- Mixing percentage points and percent.
- Using the wrong base.
Assumptions and limits
- Reference value not zero.
References
- Definitions of relative change and relative error
Questions and answers
Efficiency rises from 80 % to 86 %: what is the change?
6 percentage points, which is 7.5 % of 80.
What is the error of 98.2 against a true 100?
1.8 %.
Percentage change or difference?
Change uses the old value as the base; difference uses the mean of the two.
Method and article reviewed by FireCAD engineering on 12 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.