Worked example
Example: 10 m symmetric truss, 2.5 m rise, 50 kN. The inputs, in the units selected above:
| Input | Value |
|---|---|
| Span | 10.000 m |
| Rise of the apex | 2.5000 m |
| Apex distance from the left support | 5.0000 m |
| Vertical load at the apex | 50.000 kN |
Applying the formula below gives:
| Result | Value |
|---|---|
| Left reaction | 25.000 kN |
| Right reaction | 25.000 kN |
| Left rafter force (compression) | 55.902 kN |
| Right rafter force (compression) | 55.902 kN |
| Tie force (tension) | 50.000 kN |
Open this example in the calculator and change any input.
Formula
\(R_A = P\frac{L - a}{L}, \quad F_{AC} = \frac{R_A}{\sin\theta_1}, \quad T = F_{AC}\cos\theta_1, \quad \tan\theta_1 = \frac ha\)
Variables
| Symbol | Meaning | SI unit |
|---|---|---|
| \(L\) | Span | m |
| \(h\) | Rise of the apex | m |
| \(a\) | Apex distance from the left support | m |
| \(P\) | Vertical load at the apex | N |
| \(R_A\) | Left reaction | N |
| \(R_B\) | Right reaction | N |
| \(F_{AC}\) | Left rafter force (compression) | N |
| \(F_{BC}\) | Right rafter force (compression) | N |
| \(T_{AB}\) | Tie force (tension) | N |
Method and standards
Joint equilibrium.
Where it is used
- Simple roof trusses and A-frames.
- Teaching statics.
Common mistakes
- Ignoring self weight at panel points.
- Mixing up compression and tension members.
Assumptions and limits
- Pin joints; load at apex.
References
- Method of joints (Timoshenko and Young, Theory of Structures, 2nd ed. (McGraw-Hill))
Questions and answers
Why does the tie force rise for flat trusses?
Horizontal equilibrium at the support: tie force = reaction / tan(rafter angle), which grows as the angle falls.
Which members are in compression?
Under downward apex load, both rafters are in compression and the tie in tension.
What do the defaults represent?
A 10 m symmetric roof truss with a 2.5 m rise carrying 50 kN at the apex.
Method and article reviewed by FireCAD engineering on 13 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.