FireCADCalc

Titration: N₁V₁ = N₂V₂ and Strength in g/L

Normality of an unknown solution from a titration against a standard, and its strength in g/L from the equivalent weight.

Refinery and petrochemicalChemical and fertiliserFood, dairy and textile

Inputs

Examples: NaOH with 0.1 N acidH2SO4 with 0.05 N NaOH

Equivalents per litre.
Molar mass divided by the H⁺, OH⁻ or electrons exchanged per molecule: NaOH 40.00, H₂SO₄ 98.08/2 = 49.04.

Results

Normality of the sample0.11200mol/L
Strength5.4925g/L

Download PDF CSV Link to this result Compare another case

Log in to save calculations to your dashboard.

Worked example

Example: NaOH with 0.1 N acid. The inputs, in the units selected above:

InputValue
Normality of the standard0.10000 mol/L
Volume of standard used (titre)18.500 mL
Volume of the sample25.000 mL
Equivalent weight of the substance (molar mass ÷ equivalents per mole)40.000 kg/kmol

Applying the formula below gives:

ResultValue
Normality of the sample0.074000 mol/L
Strength2.9600 g/L

Open this example in the calculator and change any input.

Formula

\(N_2 = \frac{N_1 V_1}{V_2}, \quad S = N_2 E\)

Variables

Symbol Meaning SI unit
\(N_1\) Normality of the standard mol/m³
\(V_1\) Volume of standard used (titre) m³
\(V_2\) Volume of the sample m³
\(E\) Equivalent weight of the substance (molar mass ÷ equivalents per mole) kg/kmol
\(N_2\) Normality of the sample mol/m³
\(S\) Strength kg/m³

Method and standards

Equivalence.

Where it is used

  • Boiler water and chemical tests.
  • Laboratory examinations.

Common mistakes

  • Molarity used for polyprotic acids.
  • mL and L mixed.

Assumptions and limits

  • Complete reaction at the end point.
  • The equivalent weight is entered in the molar-mass field: divide the molar mass by the equivalents per mole yourself (H₂SO₄ 98.08/2 = 49.04).

References

  • Equivalence: N₁V₁ = N₂V₂; strength = N × equivalent weight

Questions and answers

18.5 mL of 0.1 N acid for 25 mL of NaOH?

0.074 N: 2.96 g/L of NaOH.

Normality vs molarity?

Normality counts equivalents; for NaOH they are equal, for H₂SO₄ N = 2M.

Indicator?

Choose one that changes at the equivalence pH.

Method and article reviewed by FireCAD engineering on 12 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.

Related calculators

Free engineering calculators: every page computes in SI and converts to your units. Results are for engineering estimation; verify critical designs against the referenced standards.

Rejoining the server...

Rejoin failed... trying again in seconds.

Failed to rejoin.
Please retry or reload the page.

The session has been paused by the server.

Failed to resume the session.
Please retry or reload the page.