Worked example
Example: HCl 384 g/L (33 %) to 40.7 g/L (4 %), 1 m³. The inputs, in the units selected above:
| Input | Value |
|---|---|
| Stock concentration (any unit) | 384.10 - |
| Target concentration (same unit) | 40.720 - |
| Volume of diluted solution wanted | 1,000.0 L |
Applying the formula below gives:
| Result | Value |
|---|---|
| Volume of stock solution | 106.01 L |
| Volume of water (diluent) to add | 893.99 L |
| Dilution factor | 9.4327 |
Open this example in the calculator and change any input.
Formula
\(C_1 V_1 = C_2 V_2 \qquad V_1 = \frac{C_2 V_2}{C_1} \qquad V_w = V_2 - V_1 \qquad DF = \frac{C_1}{C_2}\)
Variables
| Symbol | Meaning | SI unit |
|---|---|---|
| \(C_1\) | stock concentration | any |
| \(C_2\) | target concentration | same unit |
| \(V_2\) | final volume | m³ |
| \(V_1\) | stock volume | m³ |
| \(V_w\) | water to add | m³ |
| \(DF\) | dilution factor | – |
Method and standards
Mass of solute conserved on dilution; volumes taken as additive.
Where it is used
- Regenerant acid and caustic for DM plants.
- Dosing tank make-up.
- Laboratory standards.
Common mistakes
- Mixing mass % with volume.
- Ignoring volume contraction for strong solutions.
- Adding water to acid.
Assumptions and limits
- Volumes additive; concentrations per volume. For strengths given as % by mass, convert to per-volume with each solution's density, or use the acid dilution with densities calculator.
References
- Conservation of solute
Questions and answers
How do I make 1 m³ of 4 % HCl from 33 % acid?
Convert both to g/L first (about 384 and 40.7 g/L from their densities); then about 106 L of the acid made up to 1 m³. Using the mass per cents directly gives 121 L, about 14 % too much; the acid dilution with densities calculator does this in one step.
Does it work with % by mass?
Only approximately: for strong acids or caustic use masses, or correct for density.
Acid into water or water into acid?
Always acid into water, slowly, with stirring.
Method and article reviewed by FireCAD engineering on 12 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.