FireCADCalc

Concentration Conversions: % w/w, g/L, Molarity and Normality

Converts a solution concentration between mass per cent (w/w), g/L, molarity (mol/L) and normality (eq/L) from the solute's molar mass and the solution density.

Process steam and utilitiesRefinery and petrochemicalChemical and fertiliserFood, dairy and textileWater treatment plant

Inputs

Examples: 10 % w/w sulphuric acid, density 1 0661 M caustic soda, density 1 040120 g/L hydrochloric acid, density 1 057

Sulphuric acid 98.08; sodium hydroxide 40.00; hydrochloric acid 36.46.

Results

The solution density changes with concentration and temperature: take it from a density table for the actual strength.

Mass per cent (w/w)11.353%
Mass per volume120.00g/L
Molarity3.2913mol/L
Normality (eq/L)3.2913mol/L

Download PDF CSV Link to this result Compare another case

Log in to save calculations to your dashboard.

Worked example

Example: 10 % w/w sulphuric acid, density 1 066. The inputs, in the units selected above:

InputValue
Concentration known asMass per cent (w/w)
Mass fraction of solute (if known)10.000 %
Molarity (if known)0 mol/L
Mass per volume (if known)0 g/L
Molar mass of the solute98.080 kg/kmol
Equivalents per mole (H⁺ or OH⁻ per molecule)2.0000 -
Density of the solution1,066.0 kg/m³

Applying the formula below gives:

ResultValue
Mass per cent (w/w)10.000 %
Mass per volume106.60 g/L
Molarity1.0869 mol/L
Normality (eq/L)2.1737 mol/L

Open this example in the calculator and change any input.

Formula

\(\gamma = w \rho = \frac{c M}{1000}\)

\(c = \frac{1000\, \gamma}{M}, \quad N = c\, z\)

Variables

Symbol Meaning SI unit
\(\text{known}\) which concentration is known -
\(w\) mass fraction -
\(c\) molarity mol/m³
\(\gamma\) mass per volume kg/m³
\(M\) molar mass kg/kmol
\(z\) equivalents per mole -
\(\rho\) solution density kg/m³
\(N\) normality eq/m³

Method and standards

Mass per volume is mass fraction times solution density; dividing by the molar mass gives molarity; multiplying by equivalents per mole gives normality. SI units are used inside (mol/m³ = mmol/L).

Where it is used

  • Preparing regenerant and dosing solutions.
  • Converting lab results between units.
  • Checking chemical strength specifications.

Common mistakes

  • Using the density of water for strong solutions.
  • Confusing molarity with molality.
  • Using the wrong number of equivalents.

Assumptions and limits

  • Density at the solution's actual strength and temperature.

References

  • Definitions of concentration units

Questions and answers

What is 10 % sulphuric acid in mol/L?

With density 1.066 kg/L, 106.6 g/L, which is 1.09 mol/L or 2.17 N (two equivalents per mole).

What is the difference between molarity and normality?

Normality counts reacting equivalents: for sulphuric acid, each mole gives two H⁺, so normality is twice molarity.

Why do I need the density?

Per cent is by mass and molarity by volume; the solution density links them.

Method and article reviewed by FireCAD engineering on 12 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.

Related calculators

Free engineering calculators: every page computes in SI and converts to your units. Results are for engineering estimation; verify critical designs against the referenced standards.

Rejoining the server...

Rejoin failed... trying again in seconds.

Failed to rejoin.
Please retry or reload the page.

The session has been paused by the server.

Failed to resume the session.
Please retry or reload the page.