Worked example
Example: 10 % w/w sulphuric acid, density 1 066. The inputs, in the units selected above:
| Input | Value |
|---|---|
| Concentration known as | Mass per cent (w/w) |
| Mass fraction of solute (if known) | 10.000 % |
| Molarity (if known) | 0 mol/L |
| Mass per volume (if known) | 0 g/L |
| Molar mass of the solute | 98.080 kg/kmol |
| Equivalents per mole (H⁺ or OH⁻ per molecule) | 2.0000 - |
| Density of the solution | 1,066.0 kg/m³ |
Applying the formula below gives:
| Result | Value |
|---|---|
| Mass per cent (w/w) | 10.000 % |
| Mass per volume | 106.60 g/L |
| Molarity | 1.0869 mol/L |
| Normality (eq/L) | 2.1737 mol/L |
Open this example in the calculator and change any input.
Formula
\(\gamma = w \rho = \frac{c M}{1000}\)
\(c = \frac{1000\, \gamma}{M}, \quad N = c\, z\)
Variables
| Symbol | Meaning | SI unit |
|---|---|---|
| \(\text{known}\) | which concentration is known | - |
| \(w\) | mass fraction | - |
| \(c\) | molarity | mol/m³ |
| \(\gamma\) | mass per volume | kg/m³ |
| \(M\) | molar mass | kg/kmol |
| \(z\) | equivalents per mole | - |
| \(\rho\) | solution density | kg/m³ |
| \(N\) | normality | eq/m³ |
Method and standards
Mass per volume is mass fraction times solution density; dividing by the molar mass gives molarity; multiplying by equivalents per mole gives normality. SI units are used inside (mol/m³ = mmol/L).
Where it is used
- Preparing regenerant and dosing solutions.
- Converting lab results between units.
- Checking chemical strength specifications.
Common mistakes
- Using the density of water for strong solutions.
- Confusing molarity with molality.
- Using the wrong number of equivalents.
Assumptions and limits
- Density at the solution's actual strength and temperature.
References
- Definitions of concentration units
Questions and answers
What is 10 % sulphuric acid in mol/L?
With density 1.066 kg/L, 106.6 g/L, which is 1.09 mol/L or 2.17 N (two equivalents per mole).
What is the difference between molarity and normality?
Normality counts reacting equivalents: for sulphuric acid, each mole gives two H⁺, so normality is twice molarity.
Why do I need the density?
Per cent is by mass and molarity by volume; the solution density links them.
Method and article reviewed by FireCAD engineering on 12 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.