Worked example
Example: 50 kW DG set. The inputs, in the units selected above:
| Input | Value |
|---|---|
| Brake power | 50.000 kW |
| Fuel consumption | 12.500 kg/h |
| Fuel calorific value (net) | 42.500 MJ/kg |
Applying the formula below gives:
| Result | Value |
|---|---|
| Brake thermal efficiency | 33.882 % |
| Brake specific fuel consumption | 250.00 g/kWh |
| Heat rate | 10,625 kJ/kWh |
Open this example in the calculator and change any input.
Formula
\(\eta_{bt} = \frac{BP}{\dot m_f CV}, \quad BSFC = \frac{\dot m_f}{BP}, \quad HR = \frac{1}{\eta_{bt}}\)
Variables
| Symbol | Meaning | SI unit |
|---|---|---|
| \(BP\) | Brake power | W |
| \(\dot m_f\) | Fuel consumption | kg/s |
| \(CV\) | Fuel calorific value (net) | J/kg |
| \(\eta_{bt}\) | Brake thermal efficiency | - |
| \(BSFC\) | Brake specific fuel consumption | kg/J |
| \(HR\) | Heat rate | J/J |
Method and standards
Definitions.
Where it is used
- DG set performance checks.
- Engine testing.
Common mistakes
- Gross CV with engine data.
- Volume instead of mass of fuel.
Assumptions and limits
- Steady load.
- An efficiency of 100 % or more is rejected; above 60 % is flagged as unlikely.
References
- η_bt = BP/(ṁ_f CV); BSFC = ṁ_f/BP
Questions and answers
50 kW on 12.5 kg/h of diesel (42.5 MJ/kg)?
η 33.9 %, BSFC 250 g/kWh.
Litres instead of kg?
Multiply by density (about 0.83 kg/L for diesel).
Part load?
BSFC rises as load falls.
Method and article reviewed by FireCAD engineering on 12 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.