FireCADCalc

Brake Mean Effective Pressure and Engine Torque

Brake mean effective pressure of an engine from torque and displacement for four- or two-stroke cycles, the power at a speed, and torque per litre.

Thermal power plantProcess steam and utilitiesSugar mill and cogeneration

Inputs

Examples: 2 L four-stroke, 250 N·m at 4,000 rpmTwo-stroke 50 cm³, 4 N·m at 8,000 rpm

Results

Typical bmep at maximum torque: naturally aspirated petrol 10–13 bar, turbo petrol 18–25 bar, truck diesel 18–25 bar, large gas engines 20–24 bar.

Brake mean effective pressure5.0265bar
Brake power3.3510kW
Torque per litre (N·m/L)80.000

Download PDF CSV Link to this result Compare another case

Log in to save calculations to your dashboard.

Worked example

Example: 2 L four-stroke, 250 N·m at 4,000 rpm. The inputs, in the units selected above:

InputValue
Brake torque250.00 N·m
Total displacement2.0000 L
CycleFour-stroke
Speed4,000.0 rpm

Applying the formula below gives:

ResultValue
Brake mean effective pressure15.708 bar
Brake power104.72 kW
Torque per litre (N·m/L)125.00

Open this example in the calculator and change any input.

Formula

\(bmep = \frac{2\pi n_RT}{V_d}, \quad P_b = 2\pi nT\)

Variables

Symbol Meaning SI unit
\(T\) Brake torque N·m
\(V_d\) Total displacement m³
\(\text{cycle}\) Cycle -
\(n\) Speed 1/s
\(n_R\) Revolutions per power stroke: 2 for four-stroke, 1 for two-stroke (from the cycle) -
\(bmep\) Brake mean effective pressure Pa
\(P_b\) Brake power W
\(T/V_d\) Torque per litre (N·m/L) -

Method and standards

Definition.

Where it is used

  • Engine comparison and selection.
  • DG set and gas engine checks.

Common mistakes

  • Mixing per-cylinder and total displacement.
  • Wrong n_R for two-strokes.

Assumptions and limits

  • Brake (shaft) values.
  • A bmep above about 30 bar is flagged as beyond typical engines.

References

  • bmep = 2πn_RT/V_d (Heywood, Internal Combustion Engine Fundamentals (McGraw-Hill, 1988), ch. 2)

Questions and answers

Why use bmep?

It removes engine size: engines of any displacement can be compared for how hard they work each cycle.

Why does the stroke count matter?

A four-stroke engine fires once every two revolutions; a two-stroke fires every revolution.

What do the defaults represent?

A 2 L four-stroke engine producing 250 N·m at 4,000 rpm.

Method and article reviewed by FireCAD engineering on 13 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.

Related calculators

Free engineering calculators: every page computes in SI and converts to your units. Results are for engineering estimation; verify critical designs against the referenced standards.

Rejoining the server...

Rejoin failed... trying again in seconds.

Failed to rejoin.
Please retry or reload the page.

The session has been paused by the server.

Failed to resume the session.
Please retry or reload the page.