FireCADCalc

Cane Payment on Recoverable Sugar (SJM)

Recoverable sugar per tonne cane for payment from pol % cane and first expressed juice purity, with the Philippine molasses purity rule (Hugot 39.2), and cane value.

Sugar mill and cogeneration

Inputs

Examples: Hugot rule K 33, J 88Poorer cane J 82

Hugot: 28.57 or a local value, e.g. 33. Entered as purity points, while the purities above are in %.
Bagasse, filter cake and undetermined; extraction losses belong here.

Results

Hugot's examples of the rule with K = 33: J = 88 gives m′ = 37.8; J = 82 gives 40.2. Prices in any currency per tonne of sugar.

Molasses purity for this cane (0.4(100 − J) + K)40.200%
SJM recovery85.532%
Recoverable sugar per tonne cane90.948kg/t
Value of the sugar per tonne cane3,183.2
Payment to the grower per tonne cane2,069.1

Download PDF CSV Link to this result Compare another case

Log in to save calculations to your dashboard.

Worked example

Example: Hugot rule K 33, J 88. The inputs, in the units selected above:

InputValue
Pol % cane13.000 %
Purity of first expressed juice88.000 %
Constant in the molasses purity rule, in purity points (e.g. 33, not 0.33)33.000 -
Sugar purity99.500 %
Factory losses other than molasses (share of pol)8.0000 %
Sugar price per tonne35,000 -
Grower's share65.000 %

Applying the formula below gives:

ResultValue
Molasses purity for this cane (0.4(100 − J) + K)37.800 %
SJM recovery91.994 %
Recoverable sugar per tonne cane110.58 kg/t
Value of the sugar per tonne cane3,870.2
Payment to the grower per tonne cane2,515.6

Open this example in the calculator and change any input.

Formula

\(m' = 0.4(100 - J) + K, \quad \rho = \frac{s(J - m')}{J(s - m')}, \quad X = \frac{Pol_c(1 - \phi)\rho}{s}, \quad V_g = \sigma X p\)

Variables

Symbol Meaning SI unit
\(Pol_c\) Pol % cane -
\(J\) Purity of first expressed juice -
\(K\) Constant in the molasses purity rule, in purity points (e.g. 33) -
\(s\) Sugar purity -
\(\phi\) Factory losses other than molasses (share of pol) -
\(p\) Sugar price per tonne -
\(\sigma\) Grower's share -
\(m'\) Molasses purity for this cane (0.4(100 − J) + K) -
\(\rho\) SJM recovery -
\(X\) Recoverable sugar per tonne cane kg/kg
\(V\) Value of the sugar per tonne cane -
\(V_g\) Payment to the grower per tonne cane -

Method and standards

SJM recovery with Hugot's cited rule for m′.

Where it is used

  • Cane payment schemes.
  • Comparing cane varieties.

Common mistakes

  • Using mixed-juice purity for J.
  • Leaving out non-molasses losses.

Assumptions and limits

  • Purities in the same basis; J enters the m′ rule in purity points (J = 88 for 88 %), with K in the same points.
  • The rule is an empirical local fit; Hugot quotes it for normal juice purities (his examples J = 82–88). At J = 100 it gives m′ = K.

References

  • Hugot
  • Handbook of Cane Sugar Engineering
  • 3rd ed. (Elsevier, 1986)
  • ch. 39
  • eqns 39.1–39.2 (Philippine comment)
  • pp. 838–839

Questions and answers

Why vary the molasses purity with the cane?

Poorer juice exhausts less well; a fixed molasses purity would overpay poor cane and underpay rich cane.

What is the grower's share?

Payment systems split the value between grower and miller; enter the local share.

Is this the Hugot k method?

No: that is a separate calculator; this one follows the SJM with the Philippine rule.

Method and article reviewed by FireCAD engineering on 13 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.

Related calculators

Free engineering calculators: every page computes in SI and converts to your units. Results are for engineering estimation; verify critical designs against the referenced standards.

Rejoining the server...

Rejoin failed... trying again in seconds.

Failed to rejoin.
Please retry or reload the page.

The session has been paused by the server.

Failed to resume the session.
Please retry or reload the page.