Worked example
Example: Hugot rule K 33, J 88. The inputs, in the units selected above:
| Input | Value |
|---|---|
| Pol % cane | 13.000 % |
| Purity of first expressed juice | 88.000 % |
| Constant in the molasses purity rule, in purity points (e.g. 33, not 0.33) | 33.000 - |
| Sugar purity | 99.500 % |
| Factory losses other than molasses (share of pol) | 8.0000 % |
| Sugar price per tonne | 35,000 - |
| Grower's share | 65.000 % |
Applying the formula below gives:
| Result | Value |
|---|---|
| Molasses purity for this cane (0.4(100 − J) + K) | 37.800 % |
| SJM recovery | 91.994 % |
| Recoverable sugar per tonne cane | 110.58 kg/t |
| Value of the sugar per tonne cane | 3,870.2 |
| Payment to the grower per tonne cane | 2,515.6 |
Open this example in the calculator and change any input.
Formula
\(m' = 0.4(100 - J) + K, \quad \rho = \frac{s(J - m')}{J(s - m')}, \quad X = \frac{Pol_c(1 - \phi)\rho}{s}, \quad V_g = \sigma X p\)
Variables
| Symbol | Meaning | SI unit |
|---|---|---|
| \(Pol_c\) | Pol % cane | - |
| \(J\) | Purity of first expressed juice | - |
| \(K\) | Constant in the molasses purity rule, in purity points (e.g. 33) | - |
| \(s\) | Sugar purity | - |
| \(\phi\) | Factory losses other than molasses (share of pol) | - |
| \(p\) | Sugar price per tonne | - |
| \(\sigma\) | Grower's share | - |
| \(m'\) | Molasses purity for this cane (0.4(100 − J) + K) | - |
| \(\rho\) | SJM recovery | - |
| \(X\) | Recoverable sugar per tonne cane | kg/kg |
| \(V\) | Value of the sugar per tonne cane | - |
| \(V_g\) | Payment to the grower per tonne cane | - |
Method and standards
SJM recovery with Hugot's cited rule for m′.
Where it is used
- Cane payment schemes.
- Comparing cane varieties.
Common mistakes
- Using mixed-juice purity for J.
- Leaving out non-molasses losses.
Assumptions and limits
- Purities in the same basis; J enters the m′ rule in purity points (J = 88 for 88 %), with K in the same points.
- The rule is an empirical local fit; Hugot quotes it for normal juice purities (his examples J = 82–88). At J = 100 it gives m′ = K.
References
- Hugot
- Handbook of Cane Sugar Engineering
- 3rd ed. (Elsevier, 1986)
- ch. 39
- eqns 39.1–39.2 (Philippine comment)
- pp. 838–839
Questions and answers
Why vary the molasses purity with the cane?
Poorer juice exhausts less well; a fixed molasses purity would overpay poor cane and underpay rich cane.
What is the grower's share?
Payment systems split the value between grower and miller; enter the local share.
Is this the Hugot k method?
No: that is a separate calculator; this one follows the SJM with the Philippine rule.
Method and article reviewed by FireCAD engineering on 13 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.