Worked example
Example: 20 m arch, 4 m rise, 10 kN/m and 40 kN at 5 m. The inputs, in the units selected above:
| Input | Value |
|---|---|
| Span | 20.000 m |
| Rise at the crown | 4.0000 m |
| Uniform load over the span | 10.000 kN/m |
| Point load | 40.000 kN |
| Point load distance from the left support | 5.0000 m |
| Section distance from the left support | 5.0000 m |
Applying the formula below gives:
| Result | Value |
|---|---|
| Left vertical reaction | 130.00 kN |
| Right vertical reaction | 110.00 kN |
| Horizontal thrust | 150.00 kN |
| Arch height at the section | 3.0000 m |
| Bending moment at the section | 75.000 kN·m |
Open this example in the calculator and change any input.
Formula
\(H = \frac{M_{crown}}{h}, \quad M_x = V_Ax - \frac{wx^2}{2} - P\langle x - a\rangle - Hy, \quad y = \frac{4hx(L - x)}{L^2}\)
Variables
| Symbol | Meaning | SI unit |
|---|---|---|
| \(L\) | Span | m |
| \(h\) | Rise at the crown | m |
| \(w\) | Uniform load over the span | N/m |
| \(P\) | Point load | N |
| \(a\) | Point load distance from the left support | m |
| \(x\) | Section distance from the left support | m |
| \(V_A\) | Left vertical reaction | N |
| \(V_B\) | Right vertical reaction | N |
| \(H\) | Horizontal thrust | N |
| \(y\) | Arch height at the section | m |
| \(M_x\) | Bending moment at the section | N·m |
Method and standards
Equilibrium and crown hinge.
Where it is used
- Arched roofs, bridges and culverts.
- Teaching structural analysis.
Common mistakes
- Using a circular arch with the parabolic formula.
- Ignoring abutment thrust.
Assumptions and limits
- Parabolic axis; supports at the same level.
References
- Statics of the three-hinged arch (Timoshenko and Young, Theory of Structures, 2nd ed. (McGraw-Hill))
Questions and answers
Why do arches carry load efficiently?
The thrust H produces a moment that cancels most of the beam moment; under uniform load a parabolic arch has none.
Why must the abutments be strong?
They must resist the horizontal thrust; flat arches have large thrust.
What do the defaults represent?
A 20 m arch with a 4 m rise, 10 kN/m over the span and 40 kN at 5 m from the left.
Method and article reviewed by FireCAD engineering on 13 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.