FireCADCalc

pH of a Strong or Weak Acid or Base Solution

pH, pOH, hydrogen ion concentration and degree of dissociation of a strong or weak acid or base in water at 25 °C, solved exactly with the water equilibrium.

Refinery and petrochemicalChemical and fertiliserPulp and paperFood, dairy and textileWater treatment plant

Inputs

Examples: HCl 0.01 mol/LAcetic acid 0.1 mol/L, pKa 4.76Ammonia 0.05 mol/L, pKb 4.75NaOH 0.001 mol/LHCl 1e-7 mol/L (water matters)

Only for strong acids and bases, all of whose protons or hydroxides dissociate fully. Sulphuric acid's second proton is weak (pKa₂ about 2), so n = 2 overstates its acidity except in very dilute solutions.

Results

Ideal dilute solution at 25 °C (activities taken as concentrations); above about 0.1 mol/L the real pH differs.

Weak acids and bases are treated as monoprotic: a second dissociation step is ignored.

pH6.7910
pOH7.2090
Hydrogen ion concentration1.6180e-07mol/L
Degree of dissociation100.00%

Download PDF CSV Link to this result Compare another case

Log in to save calculations to your dashboard.

Worked example

Example: HCl 0.01 mol/L. The inputs, in the units selected above:

InputValue
SoluteStrong acid
Concentration0.010000 mol/L
pKa of the weak acid or pKb of the weak base4.7600 -
H⁺ or OH⁻ released per molecule (strong only)1.0000 -

Applying the formula below gives:

ResultValue
pH2.0000
pOH12.000
Hydrogen ion concentration0.010000 mol/L
Degree of dissociation100.00 %

Open this example in the calculator and change any input.

Formula

\(\text{strong: } x = \frac{nC + \sqrt{(nC)^2 + 4K_w}}{2}\)

\(\text{weak: } x = \frac{K C}{x + K} + \frac{K_w}{x}, \quad K = 10^{-pK}\)

\(pH = -\log_{10}[H^+], \quad pOH = 14 - pH, \quad \alpha = \frac{K}{x + K}\)

Variables

Symbol Meaning SI unit
\(\text{solute}\) Solute -
\(C\) Concentration mol/m³
\(pK\) pKa of the weak acid or pKb of the weak base -
\(n\) H⁺ or OH⁻ released per molecule (strong only) -
\(pH\) pH -
\(pOH\) pOH -
\([H^+]\) Hydrogen ion concentration mol/m³
\(\alpha\) Degree of dissociation -
\(x\) [H⁺] for an acid, [OH⁻] for a base mol/L
\(K_w\) Ionic product of water at 25 °C (mol/L)²
\(K\) Ka or Kb mol/L

Method and standards

The charge balance of the solution, including water's own dissociation (Kw = 10⁻¹⁴ at 25 °C), is solved exactly; x is [H⁺] for acids and [OH⁻] for bases.

Where it is used

  • Preparing cleaning and dosing solutions.
  • Checking neutralisation and pH adjustment.
  • Teaching and laboratory work.

Common mistakes

  • Using the weak-acid shortcut where the acid is not weak enough.
  • Forgetting a diprotic strong acid releases two H⁺ (n = 2).
  • Ignoring activity at high concentration.

Assumptions and limits

  • Ideal dilute solution at 25 °C.
  • One acid or base at a time.
  • n applies to strong electrolytes only, taken as fully dissociated. Sulphuric acid's second proton is weak (pKa₂ about 2), so n = 2 overstates its acidity except when dilute.
  • Weak acids and bases are monoprotic here: the second dissociation of a diprotic weak acid is ignored.

References

  • Acid–base equilibrium with the charge balance (Harris, Quantitative Chemical Analysis)

Questions and answers

What is the pH of 0.1 mol/L acetic acid?

With pKa 4.76, pH 2.88; only 1.3 % of the acid is dissociated.

And 0.01 mol/L hydrochloric acid?

pH 2.00: a strong acid is fully dissociated.

Why does a very dilute acid not give pH 7 or above?

Water's own ions are counted: 10⁻⁷ mol/L HCl gives pH 6.79, not 7.

Method and article reviewed by FireCAD engineering on 12 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.

Related calculators

Free engineering calculators: every page computes in SI and converts to your units. Results are for engineering estimation; verify critical designs against the referenced standards.

Rejoining the server...

Rejoin failed... trying again in seconds.

Failed to rejoin.
Please retry or reload the page.

The session has been paused by the server.

Failed to resume the session.
Please retry or reload the page.