Worked example
Example: HCl 0.01 mol/L. The inputs, in the units selected above:
| Input | Value |
|---|---|
| Solute | Strong acid |
| Concentration | 0.010000 mol/L |
| pKa of the weak acid or pKb of the weak base | 4.7600 - |
| H⁺ or OH⁻ released per molecule (strong only) | 1.0000 - |
Applying the formula below gives:
| Result | Value |
|---|---|
| pH | 2.0000 |
| pOH | 12.000 |
| Hydrogen ion concentration | 0.010000 mol/L |
| Degree of dissociation | 100.00 % |
Open this example in the calculator and change any input.
Formula
\(\text{strong: } x = \frac{nC + \sqrt{(nC)^2 + 4K_w}}{2}\)
\(\text{weak: } x = \frac{K C}{x + K} + \frac{K_w}{x}, \quad K = 10^{-pK}\)
\(pH = -\log_{10}[H^+], \quad pOH = 14 - pH, \quad \alpha = \frac{K}{x + K}\)
Variables
| Symbol | Meaning | SI unit |
|---|---|---|
| \(\text{solute}\) | Solute | - |
| \(C\) | Concentration | mol/m³ |
| \(pK\) | pKa of the weak acid or pKb of the weak base | - |
| \(n\) | H⁺ or OH⁻ released per molecule (strong only) | - |
| \(pH\) | pH | - |
| \(pOH\) | pOH | - |
| \([H^+]\) | Hydrogen ion concentration | mol/m³ |
| \(\alpha\) | Degree of dissociation | - |
| \(x\) | [H⁺] for an acid, [OH⁻] for a base | mol/L |
| \(K_w\) | Ionic product of water at 25 °C | (mol/L)² |
| \(K\) | Ka or Kb | mol/L |
Method and standards
The charge balance of the solution, including water's own dissociation (Kw = 10⁻¹⁴ at 25 °C), is solved exactly; x is [H⁺] for acids and [OH⁻] for bases.
Where it is used
- Preparing cleaning and dosing solutions.
- Checking neutralisation and pH adjustment.
- Teaching and laboratory work.
Common mistakes
- Using the weak-acid shortcut where the acid is not weak enough.
- Forgetting a diprotic strong acid releases two H⁺ (n = 2).
- Ignoring activity at high concentration.
Assumptions and limits
- Ideal dilute solution at 25 °C.
- One acid or base at a time.
- n applies to strong electrolytes only, taken as fully dissociated. Sulphuric acid's second proton is weak (pKa₂ about 2), so n = 2 overstates its acidity except when dilute.
- Weak acids and bases are monoprotic here: the second dissociation of a diprotic weak acid is ignored.
References
- Acid–base equilibrium with the charge balance (Harris, Quantitative Chemical Analysis)
Questions and answers
What is the pH of 0.1 mol/L acetic acid?
With pKa 4.76, pH 2.88; only 1.3 % of the acid is dissociated.
And 0.01 mol/L hydrochloric acid?
pH 2.00: a strong acid is fully dissociated.
Why does a very dilute acid not give pH 7 or above?
Water's own ions are counted: 10⁻⁷ mol/L HCl gives pH 6.79, not 7.
Method and article reviewed by FireCAD engineering on 12 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.