Worked example
Example: 10 % sulphuric acid from 98 %. The inputs, in the units selected above:
| Input | Value |
|---|---|
| Strength of the concentrated solution (mass fraction) | 98.000 % |
| Density of the concentrated solution | 1,836.0 kg/m³ |
| Strength wanted (mass fraction) | 10.000 % |
| Density of the dilute solution | 1,066.0 kg/m³ |
| Volume of dilute solution wanted | 1,000.0 L |
| Water density | 998.00 kg/m³ |
Applying the formula below gives:
| Result | Value |
|---|---|
| Mass of concentrated solution | 108.78 kg |
| Volume of concentrated solution | 59.246 L |
| Mass of water | 957.22 kg |
| Volume of water | 959.14 L |
Open this example in the calculator and change any input.
Formula
\(m_2 = \rho_2 V_2, \quad m_1 = \frac{w_2}{w_1} m_2, \quad m_w = m_2 - m_1\)
Variables
| Symbol | Meaning | SI unit |
|---|---|---|
| \(w_1\) | Strength of the concentrated solution (mass fraction) | - |
| \(\rho_1\) | Density of the concentrated solution | kg/m³ |
| \(w_2\) | Strength wanted (mass fraction) | - |
| \(\rho_2\) | Density of the dilute solution | kg/m³ |
| \(V_2\) | Volume of dilute solution wanted | m³ |
| \(\rho_w\) | Water density | kg/m³ |
| \(m_1\) | Mass of concentrated solution | kg |
| \(V_1\) | Volume of concentrated solution | m³ |
| \(m_w\) | Mass of water | kg |
| \(V_w\) | Volume of water | m³ |
Method and standards
Mass balance.
Where it is used
- DM plant regeneration chemicals.
- Laboratory reagents.
Common mistakes
- Volume percentages for mass percentages.
- Ignoring heat of dilution.
Assumptions and limits
- Densities at the same temperature.
References
- Solute mass balance w₁m₁ = w₂m₂ with solution densities
Questions and answers
1000 m³ of 10 % H₂SO₄ from 98 %?
Per litre: 59.2 mL of acid in 959 mL of water.
Why not C₁V₁ = C₂V₂ in %?
Percentages are by mass and volumes are not additive: the mixture shrinks and heats.
Safety?
Acid into water, slowly, with cooling and full PPE.
Method and article reviewed by FireCAD engineering on 12 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.