FireCADCalc

Raw Meal to Clinker Factor and Calcination CO2

Raw meal per tonne of clinker from loss on ignition and dust loss, and calcination CO2 per tonne of clinker from its CaO and MgO by stoichiometry.

Inputs

Examples: Duda Table 2.2 raw mix (LOI 34.67 %), 66.92 % CaOPreheater kiln, 3 % dust lostKiln using 8 % slag CaO

Results

All CaO and MgO are taken as from carbonates unless a non-carbonate share is entered; MgO may also come from silicates. Fuel CO₂ comes on top. Dust lost is assumed not returned and not calcined.

Raw meal (ignited basis) per unit clinker1.5504
Raw meal fed per unit clinker, with dust loss1.5983
Calcination CO₂ per tonne of clinker530.42kg/t
Calcination CO₂2,652.1t/d
Raw meal feed7,991.7t/d

Download PDF CSV Link to this result Compare another case

Log in to save calculations to your dashboard.

Worked example

Example: Duda Table 2.2 raw mix (LOI 34.67 %), 66.92 % CaO. The inputs, in the units selected above:

InputValue
Loss on ignition of the raw meal34.670 %
Dust lost from the kiln system (fraction of raw meal fed)0 %
CaO in clinker66.920 %
MgO in clinker2.0000 %
Share of clinker CaO from non-carbonate sources (slag, ash)0 %
Clinker production3,000.0 t/d

Applying the formula below gives:

ResultValue
Raw meal (ignited basis) per unit clinker1.5307
Raw meal fed per unit clinker, with dust loss1.5307
Calcination CO₂ per tonne of clinker547.02 kg/t
Calcination CO₂1,641.1 t/d
Raw meal feed4,592.1 t/d

Open this example in the calculator and change any input.

Formula

\(f_k = \frac{1}{1 - LOI}, \quad f_{rm} = \frac{f_k}{1 - d}, \quad CO_2 = CaO(1 - x_{nc})\frac{M_{CO_2}}{M_{CaO}} + MgO\frac{M_{CO_2}}{M_{MgO}}\)

Variables

Symbol Meaning SI unit
\(LOI\) Loss on ignition of the raw meal -
\(d\) Dust lost from the kiln system (fraction of raw meal fed) -
\(CaO\) CaO in clinker -
\(MgO\) MgO in clinker -
\(x_{nc}\) Share of clinker CaO from non-carbonate sources (slag, ash) -
\(\dot m_{cl}\) Clinker production kg/s
\(f_k\) Raw meal (ignited basis) per unit clinker -
\(f_{rm}\) Raw meal fed per unit clinker, with dust loss -
\(CO_2\) Calcination CO₂ per tonne of clinker kg/kg
\(\dot m_{CO_2}\) Calcination CO₂ kg/s
\(\dot m_{rm}\) Raw meal feed kg/s

Method and standards

Mass balance on ignition and stoichiometry.

Where it is used

  • Kiln feed planning.
  • Process CO₂ reporting.

Common mistakes

  • Forgetting dust loss in the feed rate.
  • Counting CaO from slag as carbonate CO₂.

Assumptions and limits

  • All carbonate calcined.

References

  • Duda
  • Cement Data Book
  • Vol. 1
  • 3rd ed. (Bauverlag / Macdonald and Evans, 1985)
  • ch. 2 (raw mix to clinker, Table 2.2)
  • Stoichiometry of CaCO3 and MgCO3 calcination with IUPAC atomic masses

Questions and answers

Why is the clinker factor about 1.55?

Limestone loses about 44 % of its mass as CO₂; a raw meal with 35 % loss on ignition needs 1/(1 − 0.35) = 1.54 t per tonne of clinker.

Where does the CO₂ factor of about 0.52 t/t come from?

From the CaO and MgO formed by calcination: 44/56 t CO₂ per t CaO and 44/40 per t MgO.

What do the defaults represent?

Duda's Table 2.2 raw mix (LOI 34.67 %) giving clinker with 66.92 % CaO, assumed 2 % MgO, 3,000 t/d.

Method and article reviewed by FireCAD engineering on 17 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.

Related calculators

Free engineering calculators: every page computes in SI and converts to your units. Results are for engineering estimation; verify critical designs against the referenced standards.

Rejoining the server...

Rejoin failed... trying again in seconds.

Failed to rejoin.
Please retry or reload the page.

The session has been paused by the server.

Failed to resume the session.
Please retry or reload the page.