Worked example
Example: Duda Table 2.2 raw mix (LOI 34.67 %), 66.92 % CaO. The inputs, in the units selected above:
| Input | Value |
|---|---|
| Loss on ignition of the raw meal | 34.670 % |
| Dust lost from the kiln system (fraction of raw meal fed) | 0 % |
| CaO in clinker | 66.920 % |
| MgO in clinker | 2.0000 % |
| Share of clinker CaO from non-carbonate sources (slag, ash) | 0 % |
| Clinker production | 3,000.0 t/d |
Applying the formula below gives:
| Result | Value |
|---|---|
| Raw meal (ignited basis) per unit clinker | 1.5307 |
| Raw meal fed per unit clinker, with dust loss | 1.5307 |
| Calcination CO₂ per tonne of clinker | 547.02 kg/t |
| Calcination CO₂ | 1,641.1 t/d |
| Raw meal feed | 4,592.1 t/d |
Open this example in the calculator and change any input.
Formula
\(f_k = \frac{1}{1 - LOI}, \quad f_{rm} = \frac{f_k}{1 - d}, \quad CO_2 = CaO(1 - x_{nc})\frac{M_{CO_2}}{M_{CaO}} + MgO\frac{M_{CO_2}}{M_{MgO}}\)
Variables
| Symbol | Meaning | SI unit |
|---|---|---|
| \(LOI\) | Loss on ignition of the raw meal | - |
| \(d\) | Dust lost from the kiln system (fraction of raw meal fed) | - |
| \(CaO\) | CaO in clinker | - |
| \(MgO\) | MgO in clinker | - |
| \(x_{nc}\) | Share of clinker CaO from non-carbonate sources (slag, ash) | - |
| \(\dot m_{cl}\) | Clinker production | kg/s |
| \(f_k\) | Raw meal (ignited basis) per unit clinker | - |
| \(f_{rm}\) | Raw meal fed per unit clinker, with dust loss | - |
| \(CO_2\) | Calcination CO₂ per tonne of clinker | kg/kg |
| \(\dot m_{CO_2}\) | Calcination CO₂ | kg/s |
| \(\dot m_{rm}\) | Raw meal feed | kg/s |
Method and standards
Mass balance on ignition and stoichiometry.
Where it is used
- Kiln feed planning.
- Process CO₂ reporting.
Common mistakes
- Forgetting dust loss in the feed rate.
- Counting CaO from slag as carbonate CO₂.
Assumptions and limits
- All carbonate calcined.
References
- Duda
- Cement Data Book
- Vol. 1
- 3rd ed. (Bauverlag / Macdonald and Evans, 1985)
- ch. 2 (raw mix to clinker, Table 2.2)
- Stoichiometry of CaCO3 and MgCO3 calcination with IUPAC atomic masses
Questions and answers
Why is the clinker factor about 1.55?
Limestone loses about 44 % of its mass as CO₂; a raw meal with 35 % loss on ignition needs 1/(1 − 0.35) = 1.54 t per tonne of clinker.
Where does the CO₂ factor of about 0.52 t/t come from?
From the CaO and MgO formed by calcination: 44/56 t CO₂ per t CaO and 44/40 per t MgO.
What do the defaults represent?
Duda's Table 2.2 raw mix (LOI 34.67 %) giving clinker with 66.92 % CaO, assumed 2 % MgO, 3,000 t/d.
Method and article reviewed by FireCAD engineering on 17 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.