Worked example
Example: Typical. The inputs, in the units selected above:
| Input | Value |
|---|---|
| Pol % cane | 13.500 % |
| Pol in bagasse % cane | 0.52000 % |
| Pol in filter cake % cane | 0.080000 % |
| Pol in final molasses % cane | 1.4500 % |
| Sugar made % cane | 11.200 % |
| Pol % sugar | 99.700 % |
Applying the formula below gives:
| Result | Value |
|---|---|
| Pol in sugar % cane | 11.166 % |
| Total losses % cane | 2.3336 % |
| Determined losses % cane | 2.0500 % |
| Unknown losses % cane | 0.28360 % |
Open this example in the calculator and change any input.
Formula
\(L_t = Pol_c - Pol_S\,R, \quad L_u = L_t - (L_B + L_{FC} + L_{FM})\)
Variables
| Symbol | Meaning | SI unit |
|---|---|---|
| \(Pol_c\) | Pol % cane | - |
| \(L_B\) | Pol in bagasse % cane | - |
| \(L_{FC}\) | Pol in filter cake % cane | - |
| \(L_{FM}\) | Pol in final molasses % cane | - |
| \(R\) | Sugar made % cane | - |
| \(Pol_S\) | Pol % sugar | - |
| \(Pol_{S,c}\) | Pol in sugar % cane | - |
| \(L_t\) | Total losses % cane | - |
| \(L_d\) | Determined losses % cane | - |
| \(L_u\) | Unknown losses % cane | - |
Method and standards
Pol balance.
Where it is used
- Daily and season pol balance.
- Loss reduction programmes.
Common mistakes
- No stock correction over a week.
Assumptions and limits
- Same basis for all terms.
- Negative total losses (more pol in sugar than in cane) and negative unknown losses are flagged.
References
- Sugar factory chemical control (daily manufacturing report) definitions
- as compiled in SugarProcessTech
- Formulas for calculating sugar industry DMR
Questions and answers
What are unknown losses?
Pol not found in sugar, bagasse, cake or molasses: inversion, entrainment, spills and errors.
Typical unknown losses?
A small fraction of a per cent of cane; a rising trend points to inversion or entrainment.
Stock in process?
Correct for stock changes before closing a short period.
Method and article reviewed by FireCAD engineering on 13 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.