FireCADCalc

Value of Sugar Losses per Day and Season

Sugar lost per day in bagasse, filter cake, molasses and undetermined losses from losses % cane and the crush, and its value per day and per season at a sugar price.

Sugar mill and cogeneration

Inputs

Examples: 5 000 TCDPoor season

Results

Prices are in any currency per tonne; values follow in the same currency. Molasses still has value as distillery feed, which this does not credit.

Total pol lost % cane2.5700%
Sugar equivalent lost per day129.15t/d
Value lost per day4,520,101
Value lost per season6.7802e+08
Value of the undetermined losses per season7.9146e+07

Download PDF CSV Link to this result Compare another case

Log in to save calculations to your dashboard.

Worked example

Example: 5 000 TCD. The inputs, in the units selected above:

InputValue
Cane crushed per day5,000.0 t/d
Pol lost in bagasse % cane0.60000 %
Pol lost in filter cake % cane0.070000 %
Pol lost in final molasses % cane1.6000 %
Undetermined losses % cane0.30000 %
Pol of the sugar made99.500 %
Sugar price per tonne35,000 -
Crushing days in the season150.00 -

Applying the formula below gives:

ResultValue
Total pol lost % cane2.5700 %
Sugar equivalent lost per day129.15 t/d
Value lost per day4,520,101
Value lost per season6.7802e+08
Value of the undetermined losses per season7.9146e+07

Open this example in the calculator and change any input.

Formula

\(\dot m_L = C_d\frac{\Sigma L}{Pol_s}, \quad V_d = \dot m_L\,p, \quad V_s = V_d N\)

Variables

Symbol Meaning SI unit
\(C_d\) Cane crushed per day kg/s
\(L_B\) Pol lost in bagasse % cane -
\(L_C\) Pol lost in filter cake % cane -
\(L_M\) Pol lost in final molasses % cane -
\(L_U\) Undetermined losses % cane -
\(Pol_s\) Pol of the sugar made -
\(p\) Sugar price per tonne -
\(N\) Crushing days in the season -
\(\Sigma L\) Total pol lost % cane -
\(\dot m_L\) Sugar equivalent lost per day kg/s
\(V_d\) Value lost per day -
\(V_s\) Value lost per season -
\(V_U\) Value of the undetermined losses per season -

Method and standards

Loss accounting.

Where it is used

  • Justifying loss-reduction projects.
  • Management reports.

Common mistakes

  • Mixing pol and sucrose losses.
  • Counting molasses at zero value.

Assumptions and limits

  • Steady crush over the season.
  • All lost pol is valued at the full sugar price, including the pol that unavoidably stays in final molasses; the molasses credit is not deducted, so the figure overstates the recoverable value.

References

  • Definitions of factory losses (pol balance, ISSCT); valuation at the sugar price

Questions and answers

Why convert pol to sugar?

A tonne of sugar of pol 99.5 contains 0.995 t of pol; the lost pol would have made 1/0.995 t of sugar.

Is the molasses loss all avoidable?

No: some sucrose must stay in molasses; compare with the target purity for the avoidable part.

Undetermined losses?

Inversion, entrainment and leaks; they are worth attacking first because they bring nothing back.

Method and article reviewed by FireCAD engineering on 13 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.

Related calculators

Free engineering calculators: every page computes in SI and converts to your units. Results are for engineering estimation; verify critical designs against the referenced standards.

Rejoining the server...

Rejoin failed... trying again in seconds.

Failed to rejoin.
Please retry or reload the page.

The session has been paused by the server.

Failed to resume the session.
Please retry or reload the page.