FireCADCalc

Sugar and Molasses Recoverable from Stock in Process

Sugar and molasses recoverable from up to four products in process (syrup, massecuites, molasses) by the SJM formula (Hugot 38.1–38.2, 39.1–39.3).

Sugar mill and cogeneration

Inputs

Examples: Hugot purities 99/40With a product below m

Results

Products less pure than the final molasses yield no sugar. Hugot's example: an 85-purity massecuite with 99 sugar and 40 molasses gives 76.27 % of its solids as sugar.

Sugar (dry solids) from product 1228.81t
Sugar (dry solids) from product 276.271t
Sugar (dry solids) from product 336.610t
Sugar (dry solids) from product 40t
Sugar recoverable from stock341.69t
Molasses (dry solids) from stock228.31t
Sucrose recovery of product 188.833%

Download PDF CSV Link to this result Compare another case

Log in to save calculations to your dashboard.

Worked example

Example: Hugot purities 99/40. The inputs, in the units selected above:

InputValue
Sugar purity99.000 %
Final molasses purity40.000 %
Dry solids of product 1 in stock300.00 t
Purity of product 185.000 %
Dry solids of product 2 in stock150.00 t
Purity of product 270.000 %
Dry solids of product 3 in stock120.00 t
Purity of product 358.000 %
Dry solids of product 4 in stock0 t
Purity of product 450.000 %

Applying the formula below gives:

ResultValue
Sugar (dry solids) from product 1228.81 t
Sugar (dry solids) from product 276.271 t
Sugar (dry solids) from product 336.610 t
Sugar (dry solids) from product 40 t
Sugar recoverable from stock341.69 t
Molasses (dry solids) from stock228.31 t
Sucrose recovery of product 188.833 %

Open this example in the calculator and change any input.

Formula

\(S_i = Q_i\frac{j_i - m}{s - m}, \quad \rho = \frac{s(j - m)}{j(s - m)}, \quad M = \sum Q_i - \sum S_i\)

Variables

Symbol Meaning SI unit
\(s\) Sugar purity -
\(m\) Final molasses purity -
\(Q_1\) Dry solids of product 1 in stock kg
\(j_1\) Purity of product 1 -
\(Q_2\) Dry solids of product 2 in stock kg
\(j_2\) Purity of product 2 -
\(Q_3\) Dry solids of product 3 in stock kg
\(j_3\) Purity of product 3 -
\(Q_4\) Dry solids of product 4 in stock kg
\(j_4\) Purity of product 4 -
\(S_1\) Sugar (dry solids) from product 1 kg
\(S_2\) Sugar (dry solids) from product 2 kg
\(S_3\) Sugar (dry solids) from product 3 kg
\(S_4\) Sugar (dry solids) from product 4 kg
\(\Sigma S\) Sugar recoverable from stock kg
\(\Sigma M\) Molasses (dry solids) from stock kg
\(\rho_1\) Sucrose recovery of product 1 -

Method and standards

Noël Deerr's SJM balance.

Where it is used

  • Weekly stock corrections.
  • End-of-season stock-taking.

Common mistakes

  • Using total weight instead of dry solids.
  • Mixing true and apparent purities.

Assumptions and limits

  • No further losses on the stock.
  • Each product purity lies between the molasses and the sugar purity; a product purer than the sugar is rejected.

References

  • Hugot
  • Handbook of Cane Sugar Engineering
  • 3rd ed. (Elsevier, 1986)
  • ch. 38
  • eqns 38.1–38.2
  • p. 837; ch. 39
  • eqns 39.1–39.3
  • pp. 838–840

Questions and answers

Why correct for stock?

Weekly figures compare sugar made with juice entering; material still in process must be counted as sugar and molasses to come.

Which purities?

True purities where possible; at least the same kind of purity for s, j and m.

What about products below the molasses purity?

They yield no sugar; they would only raise the molasses.

Method and article reviewed by FireCAD engineering on 13 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.

Related calculators

Free engineering calculators: every page computes in SI and converts to your units. Results are for engineering estimation; verify critical designs against the referenced standards.

Rejoining the server...

Rejoin failed... trying again in seconds.

Failed to rejoin.
Please retry or reload the page.

The session has been paused by the server.

Failed to resume the session.
Please retry or reload the page.