FireCADCalc

SJM Formula: Expected Sugar Recovery

SJM recovery factor from sugar, juice and molasses purities, and expected sugar (pol) recovery % cane from pol in clear juice and unknown losses.

Sugar mill and cogeneration

Inputs

Examples: Plantation whiteLow juice purity

Results

The SJM factor is the share of pol in juice that can be crystallised at these purities.

SJM factor S(J − M)/[J(S − M)]86.760%
Expected pol in sugar % cane10.261%
Expected sugar % cane10.302%

Download PDF CSV Link to this result Compare another case

Log in to save calculations to your dashboard.

Worked example

Example: Plantation white. The inputs, in the units selected above:

InputValue
Purity of sugar99.700 %
Purity of the juice whose pol is entered (clear juice)85.000 %
Purity of final molasses36.000 %
Pol in clear juice % cane13.500 %
Unknown losses % cane0.10000 %
Pol % sugar99.700 %

Applying the formula below gives:

ResultValue
SJM factor S(J − M)/[J(S − M)]90.226 %
Expected pol in sugar % cane12.081 %
Expected sugar % cane12.117 %

Open this example in the calculator and change any input.

Formula

\(SJM = \frac{S\,(J - M)}{J\,(S - M)}, \quad R_{pol} = Pol_{CJ,c}\,SJM - L_u, \quad R = \frac{R_{pol}}{Pol_S}\)

Variables

Symbol Meaning SI unit
\(S\) Purity of sugar -
\(J\) Purity of the juice whose pol is entered (clear juice) -
\(M\) Purity of final molasses -
\(Pol_{CJ,c}\) Pol in clear juice % cane -
\(L_u\) Unknown losses % cane -
\(Pol_S\) Pol % sugar -
\(SJM\) SJM factor S(J − M)/[J(S − M)] -
\(R_{pol}\) Expected pol in sugar % cane -
\(R\) Expected sugar % cane -

Method and standards

Purity balance.

Where it is used

  • Daily recovery targets.
  • Boiling house performance.

Common mistakes

  • Gravity purity mixed with apparent purity.
  • Molasses purity from the wrong strike.

Assumptions and limits

  • Apparent purities.
  • Juice purity and pol % cane must refer to the same juice (clear juice). A negative expected recovery (unknown losses above the recoverable pol) is flagged.

References

  • SJM formula (pol balance of sugar, juice and molasses)
  • Sugar factory chemical control (daily manufacturing report) definitions
  • as compiled in SugarProcessTech
  • Formulas for calculating sugar industry DMR

Questions and answers

Where does the SJM formula come from?

A pol and solids balance: juice solids split into sugar of purity S and molasses of purity M.

Why subtract unknown losses?

Inversion, entrainment and spills are not in the balance.

Which juice purity?

The purity of the juice whose pol % cane you enter: here clear juice, for the boiling house. Mixing clear-juice pol with mixed-juice purity gives an inconsistent balance.

Method and article reviewed by FireCAD engineering on 13 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.

Related calculators

Free engineering calculators: every page computes in SI and converts to your units. Results are for engineering estimation; verify critical designs against the referenced standards.

Rejoining the server...

Rejoin failed... trying again in seconds.

Failed to rejoin.
Please retry or reload the page.

The session has been paused by the server.

Failed to resume the session.
Please retry or reload the page.