FireCADCalc

Non-Sucrose and Brix Balance of the Boiling House

Non-sucrose in mixed juice and leaving in sugar and molasses, the share that leaves (Douwes Dekker, Hugot ch. 39) and the C massecuite it implies.

Sugar mill and cogeneration

Inputs

Examples: SeasonWeek

Results

Douwes Dekker: about 81 % of the mixed-juice non-sucrose should leave in sugar and molasses (gravity brix); here 70.6 %, at or below that figure. A higher share points to excess lime, inversion or recirculation; a molasses weight too high also inflates it.

Non-sucrose in mixed juice501.53t
Non-sucrose in sugar23.904t
Non-sucrose in molasses330.24t
Share of non-sucrose leaving70.612%
Share of brix accounted for86.177%
C massecuite implied (1 650 L/t non-sucrose)827.53m³

Download PDF CSV Link to this result Compare another case

Log in to save calculations to your dashboard.

Worked example

Example: Season. The inputs, in the units selected above:

InputValue
Mixed juice35,700 t
Mixed juice brix15.200 %
Mixed juice purity84.000 %
Sugar made3,900.0 t
Sugar brix (dry solids)99.500 %
Sugar purity99.000 %
Final molasses1,100.0 t
Molasses brix85.000 %
Molasses purity38.000 %

Applying the formula below gives:

ResultValue
Non-sucrose in mixed juice868.22 t
Non-sucrose in sugar38.805 t
Non-sucrose in molasses579.70 t
Share of non-sucrose leaving71.238 %
Share of brix accounted for88.742 %
C massecuite implied (1 650 L/t non-sucrose)1,432.6 m³

Open this example in the calculator and change any input.

Formula

\(NS = M\,B(1 - P), \quad \frac{NS_S + NS_M}{NS_J}, \quad V_C \approx 1.65\ \mathrm{m^3/t}\ \times NS_J\)

Variables

Symbol Meaning SI unit
\(M_J\) Mixed juice kg
\(B_J\) Mixed juice brix -
\(P_J\) Mixed juice purity -
\(M_S\) Sugar made kg
\(B_S\) Sugar brix (dry solids) -
\(P_S\) Sugar purity -
\(M_M\) Final molasses kg
\(B_M\) Molasses brix -
\(P_M\) Molasses purity -
\(NS_J\) Non-sucrose in mixed juice kg
\(NS_S\) Non-sucrose in sugar kg
\(NS_M\) Non-sucrose in molasses kg
\((NS_S + NS_M)/NS_J\) Share of non-sucrose leaving -
\(\Sigma B_{out}/B_J\) Share of brix accounted for -
\(V_C\) C massecuite implied (1 650 L/t non-sucrose) m³

Method and standards

Non-sucrose and brix balances.

Where it is used

  • Weekly control.
  • Checking molasses weights.

Common mistakes

  • Mixing refractometric and gravity brix.
  • Leaving filter cake out of a strict balance.

Assumptions and limits

  • Over the same period; stock changes neglected.
  • Mixed-juice purity must be below 100 %; the note compares the share leaving with Douwes Dekker's 81 %.

References

  • Hugot
  • Handbook of Cane Sugar Engineering
  • 3rd ed. (Elsevier, 1986)
  • ch. 39
  • non-sucrose and brix balances and C massecuite per tonne non-sucrose
  • pp. 841 and 847–848

Questions and answers

Why follow non-sucrose?

Unlike sucrose it is not lost by inversion in the same way; its balance reveals weighing errors and process faults.

What should the share be?

About 0.81 by gravity brix and 0.83 by refractometric brix in South African factories.

What is the C massecuite line?

Hugot: about 1 650 L of C massecuite per tonne of non-sucrose in mixed juice.

Method and article reviewed by FireCAD engineering on 13 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.

Related calculators

Free engineering calculators: every page computes in SI and converts to your units. Results are for engineering estimation; verify critical designs against the referenced standards.

Rejoining the server...

Rejoin failed... trying again in seconds.

Failed to rejoin.
Please retry or reload the page.

The session has been paused by the server.

Failed to resume the session.
Please retry or reload the page.