Worked example
Example: Hugot example. The inputs, in the units selected above:
| Input | Value |
|---|---|
| Actual boiling-house recovery ESG | 90.000 % |
| Gravity purity of mixed juice | 88.000 % |
| Gravity purity of final molasses | 38.000 % |
| True purity of final molasses | 45.000 % |
| Final molasses % cane | 3.0000 % |
| Dry solids % final molasses | 81.600 % |
| Refractometric brix of final molasses | 85.000 % |
| Mixed juice % cane | 100.00 % |
| Refractometric brix of mixed juice | 14.000 % |
| Reduced extraction | 95.000 % |
Applying the formula below gives:
| Result | Value |
|---|---|
| Gundu Rao (eqn 39.14) | 87.542 % |
| With true purity and dry solids (39.15) | 87.370 % |
| Approximate, factor 115 (39.16) | 87.340 % |
| Share of juice non-sucrose left in final molasses | 80.143 % |
| General reduced recovery e₁₂.₅ r″₈₅ (39.17, with the factor-115 form) | 82.973 % |
Open this example in the calculator and change any input.
Formula
\(r_{85} = r_g + \frac{100M}{100 - M}\cdot\frac{85 - J}{0.85J}\)
\(r'_{85} = r_g + \frac{100M'(85 - J)\,y\,DS_m}{0.85J(100 - J)\,q B_j}, \quad r''_{85} = r_g + \frac{115M(85 - J)\,y B_m}{0.85J(100 - J)\,q B_j}, \quad R = e_{12.5}\,r''_{85}\)
Variables
| Symbol | Meaning | SI unit |
|---|---|---|
| \(r_g\) | Actual boiling-house recovery ESG | - |
| \(J\) | Gravity purity of mixed juice | - |
| \(M\) | Gravity purity of final molasses | - |
| \(M'\) | True purity of final molasses | - |
| \(y\) | Final molasses % cane | - |
| \(DS_m\) | Dry solids % final molasses | - |
| \(B_m\) | Refractometric brix of final molasses | - |
| \(q\) | Mixed juice % cane | - |
| \(B_j\) | Refractometric brix of mixed juice | - |
| \(e_{12.5}\) | Reduced extraction | - |
| \(r_{85}\) | Gundu Rao (eqn 39.14) | - |
| \(r'_{85}\) | With true purity and dry solids (39.15) | - |
| \(r''_{85}\) | Approximate, factor 115 (39.16) | - |
| \(\lambda\) | Share of juice non-sucrose left in final molasses | - |
| \(R\) | General reduced recovery e₁₂.₅ r₈₅ (39.17) | - |
Method and standards
Gundu Rao's formula and Hugot's corrections.
Where it is used
- Comparing factories with different juice.
- Season reports.
Common mistakes
- Mixing refractometric and gravity values.
- Using recovery without ESG.
Assumptions and limits
- Percent forms as in Hugot; fractions at the interface.
- The general reduced recovery R uses r″₈₅, the factor-115 form.
- Molasses purity must be below juice purity; a note flags a true molasses purity below the gravity purity.
References
- Hugot
- Handbook of Cane Sugar Engineering
- 3rd ed. (Elsevier, 1986)
- ch. 39
- eqns 39.14–39.17 and example
- pp. 844–846
Questions and answers
What does Gundu Rao change?
Only the loss in final molasses depends on juice purity, so only that loss is reduced to 85 purity; other losses stay as they are.
Why use true purity and dry solids?
Gravity purity and refractometric brix of molasses differ from the true values; Hugot's form uses the real non-sucrose in molasses.
What is λ?
The share of the juice's non-sucrose that ends in final molasses, about 0.8 in defecation factories.
Method and article reviewed by FireCAD engineering on 13 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.