FireCADCalc

Daily Sugar Production, Bags and Molasses

Sugar made per day and per hour, bags filled and molasses made per day from the daily crush, recovery % cane and molasses % cane.

Sugar mill and cogenerationDistillery and ethanol

Inputs

Examples: 5000 TCD, 11 %2500 TCD

Results

Sugar per day550.00t/d
Sugar per hour (day average)22.917t/h
Bags per day11,000
Molasses per day225.00t/d

Download PDF CSV Link to this result Compare another case

Log in to save calculations to your dashboard.

Worked example

Example: 5000 TCD, 11 %. The inputs, in the units selected above:

InputValue
Cane crushed per day5,000.0 t/d
Recovery (sugar % cane)11.000 %
Final molasses % cane4.5000 %
Bag mass50.000 kg

Applying the formula below gives:

ResultValue
Sugar per day550.00 t/d
Sugar per hour (day average)22.917 t/h
Bags per day11,000
Molasses per day225.00 t/d

Open this example in the calculator and change any input.

Formula

\(\dot m_S = TCD\,R, \quad N_b = \frac{\dot m_S}{m_b}, \quad \dot m_M = TCD\,FM\)

Variables

Symbol Meaning SI unit
\(TCD\) Cane crushed per day kg/s
\(R\) Recovery (sugar % cane) -
\(FM\) Final molasses % cane -
\(m_b\) Bag mass kg
\(\dot m_S\) Sugar per day kg/s
\(\dot m_{S,h}\) Sugar per hour (day average) kg/s
\(N_b\) Bags per day -
\(\dot m_M\) Molasses per day kg/s

Method and standards

Definitions.

Where it is used

  • Daily planning.
  • Warehouse and molasses tank planning.

Common mistakes

  • Recovery as % used as fraction.

Assumptions and limits

  • Average day: sugar per hour is the daily figure over 24 h. With stoppages the hourly rate while crushing is higher (divide by the hours actually crushed).

References

  • Definitions

Questions and answers

Molasses for a distillery?

Molasses per day sets the distillery's feedstock; see the ethanol yield calculators.

Why floor the bags?

Only full bags count.

Recovery varies through the season?

Yes, use the period's figure.

Method and article reviewed by FireCAD engineering on 13 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.

Related calculators

Free engineering calculators: every page computes in SI and converts to your units. Results are for engineering estimation; verify critical designs against the referenced standards.

Rejoining the server...

Rejoin failed... trying again in seconds.

Failed to rejoin.
Please retry or reload the page.

The session has been paused by the server.

Failed to resume the session.
Please retry or reload the page.