FireCADCalc

Hopper Discharge Rate of Granular Solids (Beverloo)

Mass discharge rate of a free-flowing granular solid through a circular or slot outlet by the Beverloo correlation, from bulk density, outlet size and particle size.

Thermal power plantProcess steam and utilitiesSugar mill and cogenerationChemical and fertiliserPulp and paperFood, dairy and textile

Inputs

Examples: 3 mm granules, 300 mm round outletGrain through a 150 mm slot

Results

For free-flowing coarse solids (above about 0.5 mm); cohesive solids need a mass-flow hopper design.

Discharge rate (per metre of slot length for a slot)248.93t/h
Effective outlet size295.80mm

Download PDF CSV Link to this result Compare another case

Log in to save calculations to your dashboard.

Worked example

Example: 3 mm granules, 300 mm round outlet. The inputs, in the units selected above:

InputValue
Outlet shapeCircular
Outlet diameter or slot width300.00 mm
Particle size3.0000 mm
Bulk density800.00 kg/m³
Beverloo constant0.58000 -
Particle shape constant1.4000 -

Applying the formula below gives:

ResultValue
Discharge rate (per metre of slot length for a slot)248.93 t/h
Effective outlet size295.80 mm

Open this example in the calculator and change any input.

Formula

\(W = C\rho_b\sqrt g\,(D_0 - kd_p)^{2.5}\ \text{(circular)}, \quad W_s = 1.03\,C\rho_b\sqrt g\,(D_0 - kd_p)^{1.5}\ \text{(slot, per metre of length)}\)

Variables

Symbol Meaning SI unit
\(\text{outlet}\) Outlet shape -
\(D_0\) Outlet diameter or slot width m
\(d_p\) Particle size m
\(\rho_b\) Bulk density kg/m³
\(C\) Beverloo constant -
\(k\) Particle shape constant -
\(W\) Discharge rate (circular outlet) kg/s
\(W_s\) Discharge rate per metre of slot length (slot outlet) kg/(s·m)
\(D_0 - kd_p\) Effective outlet size m

Method and standards

Beverloo correlation.

Where it is used

  • Feeder and gate sizing.
  • Checking a bunker outlet for a required rate.

Common mistakes

  • Using it for fine or cohesive powders.
  • Outlet smaller than the arching dimension.

Assumptions and limits

  • Coarse free-flowing solids; particles below about 0.5 mm are flagged.
  • For a slot outlet (width entered as D₀) the result W_s is per metre of slot length. The slot coefficient 1.03 is carried from the earlier FireCAD version; its printed source is not yet confirmed, so treat the slot result as an estimate.

References

  • Beverloo
  • Leniger and van de Velde (1961)
  • Chem. Eng. Sci. 15: 260; Perry's Chemical Engineers' Handbook
  • 9th ed. (McGraw-Hill, 2019)
  • sec. 21

Questions and answers

Why doesn't discharge depend on fill height?

Unlike a liquid, a granular solid's outlet flow is set by the arch region just above the outlet; the head above is carried by the walls.

What is the 'empty annulus' k·d_p?

Particles near the edge of the outlet do not fall freely; the effective opening is reduced by about 1.4 particle diameters.

What do the defaults represent?

Free-flowing 3 mm granules through a 300 mm round outlet.

Method and article reviewed by FireCAD engineering on 13 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.

Related calculators

Free engineering calculators: every page computes in SI and converts to your units. Results are for engineering estimation; verify critical designs against the referenced standards.

Rejoining the server...

Rejoin failed... trying again in seconds.

Failed to rejoin.
Please retry or reload the page.

The session has been paused by the server.

Failed to resume the session.
Please retry or reload the page.