Worked example
Example: 600 °C for 2 h, C 20, equivalent at 620 °C. The inputs, in the units selected above:
| Input | Value |
|---|---|
| Tempering temperature | 600.00 °C |
| Time at temperature | 2.0000 h |
| Material constant | 20.000 - |
| Other temperature for an equivalent treatment | 620.00 °C |
Applying the formula below gives:
| Result | Value |
|---|---|
| Hollomon–Jaffe parameter T(C + log₁₀ t), T in K, t in h | 17,726 |
| Time at T₂ for the same parameter | 0.70216 h |
Open this example in the calculator and change any input.
Formula
\(HP = T\,(C + \log_{10} t), \quad T\ \text{in K},\ t\ \text{in h}\)
\(t_2 = 10^{\,HP/T_2 - C}\)
Variables
| Symbol | Meaning | SI unit |
|---|---|---|
| \(T\) | Tempering temperature | K |
| \(t\) | Time at temperature | s |
| \(C\) | Material constant | - |
| \(T_2\) | Other temperature for an equivalent treatment | K |
| \(HP\) | Hollomon–Jaffe parameter T(C + log₁₀ t), T in K, t in h | - |
| \(t_2\) | Time at T₂ for the same parameter | s |
Method and standards
Hollomon and Jaffe showed that tempered hardness depends on the single parameter T(C + log t); equal parameters give equal tempering.
Where it is used
- Comparing PWHT cycles on boiler and pressure parts.
- Counting the effect of repeated PWHT on weld procedure qualification.
- Planning heat treatment of forgings.
Common mistakes
- Mixing °R and K forms, or hours and seconds.
- Using C = 20 for steels where a different value is known.
- Ignoring heating and cooling ramps.
Assumptions and limits
- Isothermal hold; ramps not counted.
References
- J.H. Hollomon and L.D. Jaffe (1945)
- Trans. AIME 162
Questions and answers
What parameter does 600 °C for 2 h give?
With C = 20, HP = 873.15 × (20 + log 2) = 17 726 (about 17 730).
How long at 620 °C gives the same effect?
About 0.7 hours (42 minutes): each 20 K higher cuts the time by roughly a factor of three.
Why use it?
To compare tempering or PWHT cycles, and to add up repeated PWHT cycles on one weld.
Method and article reviewed by FireCAD engineering on 12 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.