FireCADCalc

Vibration Displacement, Velocity and Acceleration Conversion

Convert a sinusoidal vibration between displacement, velocity and acceleration at a frequency, in peak, peak-to-peak and RMS values, and in g.

Thermal power plantProcess steam and utilities

Inputs

Examples: 4.5 mm/s RMS at 1 480 rpm11 mm/s RMS at 50 Hz2 mm/s RMS at 2 kHz (bearing tone)

From a peak reading divide by √2; from a peak displacement x_p use 2πf·x_p/√2.

Results

Exact for a single frequency; for a mixed signal convert each spectral line separately. Acceleration (RMS) is in m/s².

Velocity (peak)2.8284mm/s
Displacement (peak)0.22508µm
Displacement (peak to peak)0.45016µm
Acceleration (RMS)25.133m/s²
Acceleration (peak) in g3.6244

Download PDF CSV Link to this result Compare another case

Log in to save calculations to your dashboard.

Worked example

Example: 4.5 mm/s RMS at 1 480 rpm. The inputs, in the units selected above:

InputValue
Velocity (RMS)4.5000 mm/s
Frequency24.667 Hz

Applying the formula below gives:

ResultValue
Velocity (peak)6.3640 mm/s
Displacement (peak)41.062 µm
Displacement (peak to peak)82.123 µm
Acceleration (RMS)0.69743 m/s²
Acceleration (peak) in g0.10058

Open this example in the calculator and change any input.

Formula

\(v_p = \sqrt 2\, v_{rms}, \quad x_p = \frac{v_p}{2\pi f}, \quad x_{pp} = 2x_p\)

\(a_{rms} = 2\pi f\, v_{rms}, \quad a_g = \frac{2\pi f\, v_p}{g}\)

Variables

Symbol Meaning SI unit
\(v_{rms}\) Velocity (RMS) m/s
\(f\) Frequency 1/s
\(v_p\) Velocity (peak) m/s
\(x_p\) Displacement (peak) m
\(x_{pp}\) Displacement (peak to peak) m
\(a_{rms}\) Acceleration (RMS) m/s²
\(a_g\) Acceleration (peak) in g -
\(g\) Standard gravity, 9.80665 m/s²

Method and standards

Derivatives of a sinusoid.

Where it is used

  • Vibration surveys.
  • Comparing readings from different instruments.

Common mistakes

  • Mixing peak and RMS.
  • Applying one frequency to a broadband reading.

Assumptions and limits

  • The input is RMS velocity. A peak velocity reading is divided by √2 first; a peak displacement x_p converts as v_rms = 2πf x_p/√2.

  • RMS acceleration is in m/s² in every unit system (there is no acceleration unit to convert it to).

  • Single sinusoid.

References

  • Sinusoidal motion: v = ω x
  • a = ω v; RMS = peak/√2

Questions and answers

What is 4.5 mm/s RMS at 1480 rpm in microns?

41.1 µm peak, 82 µm peak to peak.

Which measure suits which machine?

Displacement for slow machines and shaft probes, velocity for general machines, acceleration for bearings and gears.

Why mm/s RMS?

Most severity charts are in velocity RMS from 10 to 1000 Hz.

Method and article reviewed by FireCAD engineering on 12 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.

Related calculators

Free engineering calculators: every page computes in SI and converts to your units. Results are for engineering estimation; verify critical designs against the referenced standards.

Rejoining the server...

Rejoin failed... trying again in seconds.

Failed to rejoin.
Please retry or reload the page.

The session has been paused by the server.

Failed to resume the session.
Please retry or reload the page.