Worked example
Example: 4.5 mm/s RMS at 1 480 rpm. The inputs, in the units selected above:
| Input | Value |
|---|---|
| Velocity (RMS) | 4.5000 mm/s |
| Frequency | 24.667 Hz |
Applying the formula below gives:
| Result | Value |
|---|---|
| Velocity (peak) | 6.3640 mm/s |
| Displacement (peak) | 41.062 µm |
| Displacement (peak to peak) | 82.123 µm |
| Acceleration (RMS) | 0.69743 m/s² |
| Acceleration (peak) in g | 0.10058 |
Open this example in the calculator and change any input.
Formula
\(v_p = \sqrt 2\, v_{rms}, \quad x_p = \frac{v_p}{2\pi f}, \quad x_{pp} = 2x_p\)
\(a_{rms} = 2\pi f\, v_{rms}, \quad a_g = \frac{2\pi f\, v_p}{g}\)
Variables
| Symbol | Meaning | SI unit |
|---|---|---|
| \(v_{rms}\) | Velocity (RMS) | m/s |
| \(f\) | Frequency | 1/s |
| \(v_p\) | Velocity (peak) | m/s |
| \(x_p\) | Displacement (peak) | m |
| \(x_{pp}\) | Displacement (peak to peak) | m |
| \(a_{rms}\) | Acceleration (RMS) | m/s² |
| \(a_g\) | Acceleration (peak) in g | - |
| \(g\) | Standard gravity, 9.80665 | m/s² |
Method and standards
Derivatives of a sinusoid.
Where it is used
- Vibration surveys.
- Comparing readings from different instruments.
Common mistakes
- Mixing peak and RMS.
- Applying one frequency to a broadband reading.
Assumptions and limits
The input is RMS velocity. A peak velocity reading is divided by √2 first; a peak displacement x_p converts as v_rms = 2πf x_p/√2.
RMS acceleration is in m/s² in every unit system (there is no acceleration unit to convert it to).
Single sinusoid.
References
- Sinusoidal motion: v = ω x
- a = ω v; RMS = peak/√2
Questions and answers
What is 4.5 mm/s RMS at 1480 rpm in microns?
41.1 µm peak, 82 µm peak to peak.
Which measure suits which machine?
Displacement for slow machines and shaft probes, velocity for general machines, acceleration for bearings and gears.
Why mm/s RMS?
Most severity charts are in velocity RMS from 10 to 1000 Hz.
Method and article reviewed by FireCAD engineering on 12 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.