Worked example
Example: 85 + 85 + 80 dB; 82 dB background. The inputs, in the units selected above:
| Input | Value |
|---|---|
| Level of source 1 (dB) | 85.000 - |
| Level of source 2 (dB) | 85.000 - |
| Level of source 3 (dB, −50 if none) | 80.000 - |
| Level of source 4 (dB, −50 if none) | -50.000 - |
| Background level (for subtraction) | 82.000 - |
Applying the formula below gives:
| Result | Value |
|---|---|
| Total of the sources | 88.648 |
| Source 1 with the background subtracted | 81.979 |
Open this example in the calculator and change any input.
Formula
\(L_t = 10 \log_{10} \sum 10^{L_i/10}, \quad L_s = 10 \log_{10}\left(10^{L_1/10} - 10^{L_b/10}\right)\)
Variables
| Symbol | Meaning | SI unit |
|---|---|---|
| \(L_1\) | Level of source 1 (dB) | - |
| \(L_2\) | Level of source 2 (dB) | - |
| \(L_3\) | Level of source 3 (dB, −50 if none) | - |
| \(L_4\) | Level of source 4 (dB, −50 if none) | - |
| \(L_b\) | Background level (for subtraction) | - |
| \(L_t\) | Total of the sources | - |
| \(L_s\) | Source 1 with the background subtracted | - |
Method and standards
Sound powers add, not decibels.
Where it is used
- Noise surveys.
- Planning new machines in a noisy room.
Common mistakes
- Adding dB arithmetically.
- Mixing A-weighted and unweighted values.
Assumptions and limits
- Incoherent sources; a level of −50 dB means no source.
- The total and the background subtraction are independent: if source 1 is not above the background only the subtraction is left out.
References
- Logarithmic addition of incoherent sources
- L = 10 log₁₀ Σ 10^(Lᵢ/10)
Questions and answers
What do two 85 dB machines make together?
88 dB: doubling the power adds 3 dB.
And with an 80 dB third?
88.6 dB.
How is background subtracted?
Subtract the powers: 85 dB measured with 82 dB background is a 82.0 dB source.
Method and article reviewed by FireCAD engineering on 12 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.