FireCADCalc

A-Weighted Sound Level from Octave-Band Levels

Overall A-weighted and unweighted sound pressure levels from octave-band levels at 63 Hz to 8 kHz, with the dominant band after weighting.

Thermal power plantProcess steam and utilitiesSugar mill and cogenerationDistillery and ethanolRefinery and petrochemicalChemical and fertiliser

Inputs

Examples: Fan-room spectrumCompressor house, high-frequency

Results

A-weighting corrections at octave centres: −26.2, −16.1, −8.6, −3.2, 0, +1.2, +1.0, −1.1 dB (IEC 61672 values). The dominant A-weighted band shows where noise control will pay off most.

A-weighted level (dBA)87.009
Unweighted (linear) level (dB)92.732
Dominant band after A-weighting1,000.0Hz

Download PDF CSV Link to this result Compare another case

Log in to save calculations to your dashboard.

Worked example

Example: Fan-room spectrum. The inputs, in the units selected above:

InputValue
63 Hz band (dB)85.000 -
125 Hz band (dB)88.000 -
250 Hz band (dB)86.000 -
500 Hz band (dB)84.000 -
1 kHz band (dB)82.000 -
2 kHz band (dB)79.000 -
4 kHz band (dB)75.000 -
8 kHz band (dB)70.000 -

Applying the formula below gives:

ResultValue
A-weighted level (dBA)87.009
Unweighted (linear) level (dB)92.732
Dominant band after A-weighting1,000.0 Hz

Open this example in the calculator and change any input.

Formula

\(L_A = 10\log_{10}\sum_i10^{(L_i + A_i)/10}, \quad L_Z = 10\log_{10}\sum_i10^{L_i/10}\)

Variables

Symbol Meaning SI unit
\(L_{63}\) 63 Hz band (dB) -
\(L_{125}\) 125 Hz band (dB) -
\(L_{250}\) 250 Hz band (dB) -
\(L_{500}\) 500 Hz band (dB) -
\(L_{1k}\) 1 kHz band (dB) -
\(L_{2k}\) 2 kHz band (dB) -
\(L_{4k}\) 4 kHz band (dB) -
\(L_{8k}\) 8 kHz band (dB) -
\(L_A\) A-weighted level (dBA) -
\(L_Z\) Unweighted (linear) level (dB) -
\(f_{dom}\) Dominant band after A-weighting 1/s

Method and standards

Logarithmic addition with A-weighting.

Where it is used

  • Noise surveys and specifications.
  • Choosing where to treat noise.

Common mistakes

  • Adding decibels arithmetically.
  • Using one-third-octave weights for octave bands.

Assumptions and limits

  • Octave bands 63 Hz–8 kHz.

References

  • A-weighting at octave-band centre frequencies (IEC 61672-1 values) and logarithmic addition

Questions and answers

Why A-weighting?

The ear is less sensitive at low frequencies; dBA approximates how loud noise sounds and how it harms hearing.

Why can dBA be much lower than dB?

Low-frequency noise from fans, engines and furnaces is heavily discounted by A-weighting.

What do the defaults represent?

A fan-room spectrum peaking at 125 Hz.

Method and article reviewed by FireCAD engineering on 13 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.

Related calculators

Free engineering calculators: every page computes in SI and converts to your units. Results are for engineering estimation; verify critical designs against the referenced standards.

Rejoining the server...

Rejoin failed... trying again in seconds.

Failed to rejoin.
Please retry or reload the page.

The session has been paused by the server.

Failed to resume the session.
Please retry or reload the page.