FireCADCalc

Gas Concentration: % LEL, % Volume and ppm

Convert a flammable gas concentration between percent of the lower explosive limit, percent by volume and ppm, from the gas's LEL.

Thermal power plantRefinery and petrochemicalChemical and fertiliser

Inputs

Examples: 1.1 % methane, LEL 4.4 %0.5 % propane, LEL 1.7 %400 ppm hydrogen, LEL 4 %

From the gas's safety data sheet or a recognised table (methane is about 4.4 % in IEC 60079-20-1, 5 % in older tables).

Results

Catalytic and infrared detectors are calibrated for one gas; other gases need the maker's cross-sensitivity factor.

Concentration as a share of the LEL1.0000%
Concentration in ppm400.00
Concentration at 20 % LEL0.80000%

Download PDF CSV Link to this result Compare another case

Log in to save calculations to your dashboard.

Worked example

Example: 1.1 % methane, LEL 4.4 %. The inputs, in the units selected above:

InputValue
Lower explosive limit of the gas (by volume)4.4000 %
Gas concentration by volume1.1000 %

Applying the formula below gives:

ResultValue
Concentration as a share of the LEL25.000 %
Concentration in ppm11,000
Concentration at 20 % LEL0.88000 %

Open this example in the calculator and change any input.

Formula

\(\%LEL = \frac{x}{LEL}, \quad c\,[\text{ppm}] = 10^6 x\)

Variables

Symbol Meaning SI unit
\(LEL\) Lower explosive limit of the gas (by volume) -
\(x\) Gas concentration by volume -
\(\%LEL\) Concentration as a share of the LEL -
\(c\) Concentration in ppm -
\(x_{20}\) Concentration at 20 % LEL -

Method and standards

Definitions.

Where it is used

  • Gas detector alarms and calibration.
  • Hot-work permits.

Common mistakes

  • Mixing % LEL and % volume.
  • Using a methane-calibrated detector for other gases.

Assumptions and limits

  • Single gas in air. Readings at or above 20 % LEL and at or above 100 % LEL are flagged.

References

  • Definition: % LEL = concentration / LEL

Questions and answers

What is 1.1 % methane in % LEL?

25 % LEL with an LEL of 4.4 % (22 % with 5 %).

What concentration is 20 % LEL?

0.88 % by volume of methane, 8800 ppm.

Which LEL should I use?

The one your detector is calibrated to; the tables differ.

Method and article reviewed by FireCAD engineering on 12 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.

Related calculators

Free engineering calculators: every page computes in SI and converts to your units. Results are for engineering estimation; verify critical designs against the referenced standards.

Rejoining the server...

Rejoin failed... trying again in seconds.

Failed to rejoin.
Please retry or reload the page.

The session has been paused by the server.

Failed to resume the session.
Please retry or reload the page.