FireCADCalc

Vertical Curve: Offsets, Elevations and High or Low Point

Elevation of a parabolic vertical curve at a distance from its start from the two grades and length, with the offset from the tangent and the high or low point.

Inputs

Examples: Crest +3 % to -2 %Sag -4 % to +1 %Same-sign grades +1 % to +4 %

Results

Algebraic grade difference g₂ − g₁-5.0000%
Offset from the incoming tangent (g₂ − g₁) x²/(2L)-0.80000m
Curve elevation at x101.60m
Distance to the high or low point120.00m
Elevation of the high or low point101.80m

Download PDF CSV Link to this result Compare another case

Log in to save calculations to your dashboard.

Worked example

Example: Crest +3 % to -2 %. The inputs, in the units selected above:

InputValue
Incoming grade3.0000 %
Outgoing grade-2.0000 %
Curve length (horizontal)200.00 m
Elevation at the start of the curve100.00 m
Distance from the start80.000 m

Applying the formula below gives:

ResultValue
Algebraic grade difference g₂ − g₁-5.0000 %
Offset from the incoming tangent (g₂ − g₁) x²/(2L)-0.80000 m
Curve elevation at x101.60 m
Distance to the high or low point120.00 m
Elevation of the high or low point101.80 m

Open this example in the calculator and change any input.

Formula

\(z(x) = z_{BVC} + g_1 x + \frac{(g_2 - g_1)x^2}{2L}, \quad x_t = -\frac{g_1 L}{g_2 - g_1}\)

Variables

Symbol Meaning SI unit
\(g_1\) Incoming grade -
\(g_2\) Outgoing grade -
\(L\) Curve length (horizontal) m
\(z_{BVC}\) Elevation at the start of the curve m
\(x\) Distance from the start m
\(A\) Algebraic grade difference g₂ − g₁ -
\(y\) Offset from the incoming tangent (g₂ − g₁) x²/(2L) m
\(z(x)\) Curve elevation at x m
\(x_t\) Distance to the high or low point m
\(z_t\) Elevation of the high or low point m

Method and standards

Equal-tangent parabola.

Where it is used

  • Road and drain profiles.
  • Setting out levels.

Common mistakes

  • Percent vs fraction in grades.
  • Measuring x along the slope.

Assumptions and limits

  • When both grades have the same sign there is no high or low point inside the curve; x_t and z_t are then left out (the extreme elevations are at the ends).

  • Horizontal distances, symmetric curve.

References

  • Equal-tangent parabolic vertical curve

Questions and answers

+3 % to −2 % over 200 m?

High point 120 m from the start, 1.80 m above it.

Why a parabola?

Grade changes at a constant rate, giving a smooth ride.

Curve length?

Your road standard sets it from sight distance and comfort.

Method and article reviewed by FireCAD engineering on 12 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.

Related calculators

Free engineering calculators: every page computes in SI and converts to your units. Results are for engineering estimation; verify critical designs against the referenced standards.

Rejoining the server...

Rejoin failed... trying again in seconds.

Failed to rejoin.
Please retry or reload the page.

The session has been paused by the server.

Failed to resume the session.
Please retry or reload the page.