Worked example
Example: 80 km/h level. The inputs, in the units selected above:
| Input | Value |
|---|---|
| Speed | 80.000 km/h |
| Perception–reaction time | 2.5000 s |
| Longitudinal friction factor | 0.35000 - |
| Grade (positive uphill) | 0 % |
Applying the formula below gives:
| Result | Value |
|---|---|
| Reaction distance v t_r | 55.556 m |
| Braking distance v²/(2g(f + G)) | 71.938 m |
| Stopping sight distance | 127.49 m |
Open this example in the calculator and change any input.
Formula
\(SSD = v t_r + \frac{v^2}{2 g (f + G)}\)
Variables
| Symbol | Meaning | SI unit |
|---|---|---|
| \(v\) | Speed | m/s |
| \(t_r\) | Perception–reaction time | s |
| \(f\) | Longitudinal friction factor | - |
| \(G\) | Grade (positive uphill) | - |
| \(d_r\) | Reaction distance v t_r | m |
| \(d_b\) | Braking distance v²/(2g(f + G)) | m |
| \(SSD\) | Stopping sight distance | m |
Method and standards
Uniform deceleration after the reaction time.
Where it is used
- Road and junction layout.
- Site traffic plans.
Common mistakes
- km/h in the formula.
- Ignoring grade.
Assumptions and limits
- Constant friction. To work from a deceleration a instead, enter f = a/g: the AASHTO 2011 value a = 3.4 m/s² is f = 0.347.
References
- SSD = v t + v²/(2g(f ± G)) (AASHTO Green Book and IRC basic relation)
Questions and answers
80 km/h, 2.5 s, f 0.35, level?
Reaction 55.6 m, braking 71.9 m, total 127 m.
Downhill?
Use a negative grade: braking distance grows.
Where is it used?
Setting sight lines at bends, crests and junctions, including plant roads.
Method and article reviewed by FireCAD engineering on 12 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.