FireCADCalc

Asphalt (Bituminous) Quantity in Tonnes

Tonnes of asphalt or bituminous mix for a pavement layer from area, compacted thickness and compacted density, with the binder content and truck loads.

Inputs

Examples: 2000 m2 at 50 mmYard 5000 m2 at 75 mm

Results

Mix needed (with wastage)918.00t
Binder in the mix41.310t
Truck loads (rounded up)37.000

Download PDF CSV Link to this result Compare another case

Log in to save calculations to your dashboard.

Worked example

Example: 2000 m2 at 50 mm. The inputs, in the units selected above:

InputValue
Area to pave2,000.0 m²
Compacted layer thickness50.000 mm
Compacted density of the mix2,350.0 kg/m³
Binder content (by mass of mix)5.5000 %
Wastage allowance3.0000 %
Truck load20.000 t

Applying the formula below gives:

ResultValue
Mix needed (with wastage)242.05 t
Binder in the mix13.313 t
Truck loads (rounded up)13.000

Open this example in the calculator and change any input.

Formula

\(m = A\, t\, \rho\, (1 + k_w), \quad m_b = b\, m\)

Variables

Symbol Meaning SI unit
\(A\) Area to pave m²
\(t\) Compacted layer thickness m
\(\rho\) Compacted density of the mix kg/m³
\(b\) Binder content (by mass of mix) -
\(k_w\) Wastage allowance -
\(m_t\) Truck load kg
\(m\) Mix needed (with wastage) kg
\(m_b\) Binder in the mix kg
\(N\) Truck loads (rounded up) -

Method and standards

Mass of the compacted layer.

Where it is used

  • Road and yard paving.
  • Ordering mix.

Common mistakes

  • Loose thickness.
  • Density of the aggregate instead of the mix.

Assumptions and limits

  • Uniform thickness.

References

  • Mass = area × compacted thickness × compacted density

Questions and answers

2000 m² at 50 mm, 2350 kg/m³, 3 % wastage?

242 t of mix, 13.3 t of binder.

Which density?

The compacted (core) density from the mix design.

Why compacted thickness?

The loose layer is thicker before rolling.

Method and article reviewed by FireCAD engineering on 12 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.

Related calculators

Free engineering calculators: every page computes in SI and converts to your units. Results are for engineering estimation; verify critical designs against the referenced standards.

Rejoining the server...

Rejoin failed... trying again in seconds.

Failed to rejoin.
Please retry or reload the page.

The session has been paused by the server.

Failed to resume the session.
Please retry or reload the page.