FireCADCalc

Gas Mixture Molar Mass, Density and Specific Gravity

Molar mass, specific gas constant, normal density and specific gravity of a gas mixture from its mole (volume) percentages, as an ideal gas.

Thermal power plantProcess steam and utilitiesRefinery and petrochemicalChemical and fertiliserFuel oil and gas system

Inputs

Examples: Natural gas: 90 % CH4, 5 % C2H6, 2 % C3H8, 0.5 % C4H10, 1 % CO2, 1.5 % N2Biogas: 60 % CH4, 38 % CO2, 2 % H2OProducer gas: 20 % CO, 15 % H2, 3 % CH4, 10 % CO2, 52 % N2

Results

Molar mass of the mixture26.710kg/kmol
Density at 0 °C and 1.01325 bar1.1916kg/m³
Specific gravity (air = 1)0.92210
Specific gas constant0.31129kJ/(kg·K)
Sum of the entered percentages100.00%

Download PDF CSV Link to this result Compare another case

Log in to save calculations to your dashboard.

Worked example

Example: Natural gas: 90 % CH4, 5 % C2H6, 2 % C3H8, 0.5 % C4H10, 1 % CO2, 1.5 % N2. The inputs, in the units selected above:

InputValue
CH₄ methane, mole %90.000 %
C₂H₆ ethane, mole %5.0000 %
C₃H₈ propane, mole %2.0000 %
C₄H₁₀ butane, mole %0.50000 %
H₂ hydrogen, mole %0 %
CO carbon monoxide, mole %0 %
CO₂ carbon dioxide, mole %1.0000 %
N₂ nitrogen, mole %1.5000 %
O₂ oxygen, mole %0 %
H₂O water vapour, mole %0 %

Applying the formula below gives:

ResultValue
Molar mass of the mixture17.975 kg/kmol
Density at 0 °C and 1.01325 bar0.80196 kg/m³
Specific gravity (air = 1)0.62056
Specific gas constant0.46256 kJ/(kg·K)
Sum of the entered percentages100.00 %

Open this example in the calculator and change any input.

Formula

\(M = \frac{\sum y_i M_i}{\sum y_i} \qquad \rho_n = \frac{M}{V_{m,n}} \qquad SG = \frac{M}{M_{air}} \qquad R_s = \frac{R_u}{M}\)

Variables

Symbol Meaning SI unit
\(y_{CH4}, y_{C2H6}, y_{C3H8}, y_{C4H10}, y_{H2}, y_{CO}, y_{CO2}, y_{N2}, y_{O2}, y_{H2O}\) mole fractions of each gas –
\(M\) mixture molar mass kg/kmol
\(\rho_n\) density at 0 °C, 1.01325 bar kg/m³
\(SG\) specific gravity (air = 1) –
\(R_s\) specific gas constant J/(kg·K)
\(\Sigma y\) sum entered –
\(M_i\) molar mass of each gas kg/kmol
\(V_{m,n}\) molar volume at normal conditions m³/kmol
\(R_u\) universal gas constant J/(kmol·K)

Method and standards

Mole-fraction weighting of IUPAC 2013 molar masses; ideal-gas molar volume at 0 °C and 1 atm.

Where it is used

  • Gas flow meter settings.
  • Burner and gas train design.
  • Biogas and producer gas handling.

Common mistakes

  • Using mass percent as mole percent.
  • Using ideal gas at high pressure.
  • Confusing normal (0 °C) and standard (15 °C) conditions.

Assumptions and limits

  • Ideal gas; real-gas compressibility not included. Natural gas at normal conditions has Z of about 0.997–0.998, so its real normal density (ISO 6976) is about 0.2–0.3 % higher than shown.

References

  • IUPAC 2013 atomic masses; ideal gas

Questions and answers

What is the molar mass of a typical natural gas?

90 % CH₄, 5 % C₂H₆, 2 % C₃H₈, 0.5 % C₄H₁₀, 1 % CO₂ and 1.5 % N₂ give 17.98 kg/kmol, 0.802 kg/Nm³ and specific gravity 0.621.

Volume or mass percent?

Mole percent, which equals volume percent for ideal gases.

Why might they not add to 100?

Analysis rounding; the results are normalised and a warning shows.

Method and article reviewed by FireCAD engineering on 12 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.

Related calculators

Free engineering calculators: every page computes in SI and converts to your units. Results are for engineering estimation; verify critical designs against the referenced standards.

Rejoining the server...

Rejoin failed... trying again in seconds.

Failed to rejoin.
Please retry or reload the page.

The session has been paused by the server.

Failed to resume the session.
Please retry or reload the page.