FireCADCalc

Fugacity Coefficient by Peng–Robinson or SRK

Fugacity coefficient and fugacity of a pure gas or liquid by the Peng–Robinson or SRK equation of state, with Z, molar volume and density.

Refinery and petrochemicalChemical and fertiliserPulp and paperFood, dairy and textile

Inputs

Examples: Ammonia vapour 353.15 K 41.352 bar, PR (Perry's example)Ammonia liquid, PR (Perry's example)Ammonia vapour, SRK (Perry's example)Methane 300 K 50 bar, SRK

Results

Vapour and liquid roots both exist; the vapour root has the lower fugacity and is the stable phase. The other root is metastable.

Compressibility factor0.75976
Molar volume539.48cm³/mol
Density31.569kg/m³
Fugacity coefficient0.80749
Fugacity33.391bar
Number of physical roots (Z > B)3.0000

Download PDF CSV Link to this result Compare another case

Log in to save calculations to your dashboard.

Worked example

Example: Ammonia vapour 353.15 K 41.352 bar, PR (Perry's example). The inputs, in the units selected above:

InputValue
Temperature80.000 °C
Pressure (absolute)41.352 bar
Critical temperature132.50 °C
Critical pressure112.80 bar
Acentric factor0.25261 -
Molar mass17.031 kg/kmol
Equation of statePeng–Robinson
Phase rootVapour (largest root)

Applying the formula below gives:

ResultValue
Compressibility factor0.74445
Molar volume528.60 cm³/mol
Density32.219 kg/m³
Fugacity coefficient0.79489
Fugacity32.870 bar
Number of physical roots (Z > B)3.0000

Open this example in the calculator and change any input.

Formula

\(Z^3 - (1 - B)Z^2 + (A - 3B^2 - 2B)Z - (AB - B^2 - B^3) = 0\ \text{(PR)}, \quad A = \frac{ap}{R^2T^2}, \quad B = \frac{bp}{RT}\)

\(a = 0.45724\frac{R^2T_c^2}{p_c}\left[1 + \kappa(1 - \sqrt{T_r})\right]^2, \quad b = 0.07780\frac{RT_c}{p_c}, \quad \kappa = 0.37464 + 1.54226\omega - 0.26992\omega^2\)

\(\ln\phi = Z - 1 - \ln(Z - B) - \frac{A}{2\sqrt2 B}\ln\frac{Z + (1 + \sqrt2)B}{Z + (1 - \sqrt2)B}\ \text{(PR)}\)

\(Z^3 - Z^2 + (A - B - B^2)Z - AB = 0, \quad a = 0.42748\frac{R^2T_c^2}{p_c}\alpha, \quad b = 0.08664\frac{RT_c}{p_c}, \quad \kappa = 0.480 + 1.574\omega - 0.176\omega^2\ \text{(SRK)}\)

\(\ln\phi = Z - 1 - \ln(Z - B) - \frac{A}{B}\ln\left(1 + \frac{B}{Z}\right)\ \text{(SRK)}, \quad f = \phi p\)

Variables

Symbol Meaning SI unit
\(T\) Temperature K
\(p\) Pressure Pa
\(T_c\) Critical temperature K
\(p_c\) Critical pressure Pa
\(\omega\) Acentric factor -
\(M\) Molar mass kg/kmol
\(\text{EoS}\) Equation of state -
\(\text{root}\) Phase root -
\(Z\) Compressibility factor -
\(V\) Molar volume m³/mol
\(\rho\) Density kg/m³
\(\phi\) Fugacity coefficient -
\(f\) Fugacity Pa
\(n_r\) Number of real roots -

Method and standards

Cubic equation solved analytically; fugacity coefficient from the standard closed forms.

Where it is used

  • Gas density and compressibility at pressure.
  • Flash and VLE starting points.

Common mistakes

  • Using for polar liquids without care.
  • Picking the wrong root.

Assumptions and limits

  • Pure component; classical mixing rules not included.
  • Only roots with Z > B are physical and counted. When vapour and liquid roots both exist, the chosen root is returned and a note says which phase has the lower fugacity (the stable one).

References

  • Perry's Chemical Engineers' Handbook
  • 9th ed. (McGraw-Hill, 2019)
  • sec. 2
  • Eq. (2-70) and Table 2-172 (cubic equations of state) and the ammonia worked example

Questions and answers

Which is better, PR or SRK?

Perry's: Peng–Robinson is better tuned to liquid densities, SRK to vapour–liquid equilibrium and vapour densities.

What does Perry's ammonia example give?

At 353.15 K and 41.35 bar, PR gives 5.29 × 10⁻⁴ m³/mol for the vapour and 3.91 × 10⁻⁵ for the liquid.

What is fugacity?

The pressure corrected for non-ideality; phases are in equilibrium when their fugacities are equal.

How accurate are liquid densities?

Often 10–20 % low; use the Rackett equation for saturated liquids.

Method and article reviewed by FireCAD engineering on 13 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.

Related calculators

Free engineering calculators: every page computes in SI and converts to your units. Results are for engineering estimation; verify critical designs against the referenced standards.

Rejoining the server...

Rejoin failed... trying again in seconds.

Failed to rejoin.
Please retry or reload the page.

The session has been paused by the server.

Failed to resume the session.
Please retry or reload the page.