FireCADCalc

Diffuser Percolation Rate and Juice Circulation

Juice circulated through a diffuser bed from the percolation rate and bed area, the circulation per tonne cane and the time for juice to pass the bed (Hugot ch. 23).

Sugar mill and cogenerationPump

Inputs

Examples: de Smet bagasse rateCane diffuser rate

Hugot: de Smet bagasse 14–25 m³/(m²·h), about 17–18; cane 7–15, about 12.

Results

Hugot: heating water 5–10 times the bagasse weight in bagasse diffusers, 4–5 times the cane in cane diffusers.

Juice circulated4,972.5m³/h
Circulation per tonne cane20.884kg/kg
Time for juice to cross the bed6.3529min

Download PDF CSV Link to this result Compare another case

Log in to save calculations to your dashboard.

Worked example

Example: de Smet bagasse rate. The inputs, in the units selected above:

InputValue
Crushing rate250.00 t/h
Diffuser width6.5000 m
Length of bed under percolation45.000 m
Percolation rate17.000 m/h
Bed depth1.8000 m
Juice density1,050.0 kg/m³

Applying the formula below gives:

ResultValue
Juice circulated4,972.5 m³/h
Circulation per tonne cane20.884 kg/kg
Time for juice to cross the bed6.3529 min

Open this example in the calculator and change any input.

Formula

\(\dot V = u\,L\,Z, \quad \frac{\dot m_J}{A} = \frac{\rho_J \dot V}{A}, \quad t_p = \frac{H}{u}\)

Variables

Symbol Meaning SI unit
\(A\) Crushing rate kg/s
\(L\) Diffuser width m
\(Z\) Length of bed under percolation m
\(u\) Percolation rate m/s
\(H\) Bed depth m
\(\rho_J\) Juice density kg/m³
\(\dot V\) Juice circulated m³/s
\(\dot m_J/A\) Circulation per tonne cane kg/kg
\(t_p\) Time for juice to cross the bed s

Method and standards

Continuity over the bed area.

Where it is used

  • Sizing recirculation pumps.
  • Checking flooding risk.

Common mistakes

  • Using the whole diffuser length where only part percolates.
  • Mixing m/h and m/min.

Assumptions and limits

  • Uniform percolation over the area.
  • The crossing time uses the superficial percolation rate; the juice moves faster in the voids of the bed, so the time is an upper estimate.
  • Hugot's heating-water multiples in the note are for comparison only; they are not checked against the computed circulation.

References

  • Hugot
  • Handbook of Cane Sugar Engineering
  • 3rd ed. (Elsevier, 1986)
  • ch. 23
  • percolation and recirculation
  • pp. 373–391

Questions and answers

What limits percolation?

Fine preparation and high compaction slow it; mud and soil in the cane block the bed.

Why circulate so much juice?

Each stage sprays far more juice than passes forward, so the bed is washed many times.

Juice time through the bed?

Hugot: about 2.5–3.5 min at 0.7 m/min.

Method and article reviewed by FireCAD engineering on 13 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.

Related calculators

Free engineering calculators: every page computes in SI and converts to your units. Results are for engineering estimation; verify critical designs against the referenced standards.

Rejoining the server...

Rejoin failed... trying again in seconds.

Failed to rejoin.
Please retry or reload the page.

The session has been paused by the server.

Failed to resume the session.
Please retry or reload the page.