FireCADCalc

Diffuser Draft, Juice Brix and Imbibition Balance

Draft juice, its brix, final bagasse and imbibition water of a diffuser from cane brix, extraction, draft and fibre in the final bagasse (mass balance).

Sugar mill and cogeneration

Inputs

Examples: 250 TCH, draft 105 %High draft

Hugot: 100–105 % on cane; above 110 % no water is added.

Results

Draft juice262.50t/h
Brix of draft juice14.857%
Final bagasse72.500t/h
Imbibition water85.000t/h
Imbibition % fibre234.48%

Download PDF CSV Link to this result Compare another case

Log in to save calculations to your dashboard.

Worked example

Example: 250 TCH, draft 105 %. The inputs, in the units selected above:

InputValue
Crushing rate250.00 t/h
Fibre % cane14.500 %
Brix % cane16.000 %
Brix extraction97.500 %
Draft (draft juice per cane)105.00 %
Fibre % final bagasse50.000 %

Applying the formula below gives:

ResultValue
Draft juice262.50 t/h
Brix of draft juice14.857 %
Final bagasse72.500 t/h
Imbibition water85.000 t/h
Imbibition % fibre234.48 %

Open this example in the calculator and change any input.

Formula

\(J = d A, \quad B_J = \frac{B_c e}{d}, \quad B = \frac{A f}{f'}, \quad W = J + B - A\)

Variables

Symbol Meaning SI unit
\(A\) Crushing rate kg/s
\(f\) Fibre % cane -
\(B_c\) Brix % cane -
\(e\) Brix extraction -
\(d\) Draft (draft juice per cane) -
\(f'\) Fibre % final bagasse -
\(J\) Draft juice kg/s
\(B_J\) Brix of draft juice -
\(B\) Final bagasse kg/s
\(W\) Imbibition water kg/s
\(W/(A f)\) Imbibition % fibre -

Method and standards

Mass and soluble-solids balance.

Where it is used

  • Setting diffuser water.
  • Checking juice brix to the evaporators.

Common mistakes

  • Using draft % fibre.
  • Counting returned press water as imbibition.

Assumptions and limits

  • Losses and evaporation neglected.
  • Direct steam injected to heat the diffuser condenses into the juice and is not an input; with direct heating W overstates the imbibition water by that condensate.
  • Extraction and fibre % bagasse are independent inputs; a note appears when the brix they leave in the bagasse, B_c(1 − e)A/B, exceeds 5 %.

References

  • Hugot
  • Handbook of Cane Sugar Engineering
  • 3rd ed. (Elsevier, 1986)
  • ch. 23
  • draft and juice balance (Table 23.3 and pp. 369–380)
  • Mass balance: cane + water = draft juice + bagasse (losses neglected)

Questions and answers

Why is draft juice weaker than mill juice?

More water passes through a diffuser; brix of draft juice falls as draft rises.

Does press water count?

Press water from the dewatering mills returns to the diffuser and is inside the balance; only fresh water is W.

Typical imbibition?

Diffusers run 250–350 % on fibre, more than mills.

Method and article reviewed by FireCAD engineering on 13 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.

Related calculators

Free engineering calculators: every page computes in SI and converts to your units. Results are for engineering estimation; verify critical designs against the referenced standards.

Rejoining the server...

Rejoin failed... trying again in seconds.

Failed to rejoin.
Please retry or reload the page.

The session has been paused by the server.

Failed to resume the session.
Please retry or reload the page.