Worked example
Example: Typical. The inputs, in the units selected above:
| Input | Value |
|---|---|
| Mixed juice purity | 84.000 % |
| Pol in mixed juice % cane | 13.000 % |
| Sugar made % cane (recovery) | 11.000 % |
| Pol % sugar | 99.700 % |
Applying the formula below gives:
| Result | Value |
|---|---|
| Actual boiling house recovery | 84.362 % |
| Basic BHR (molasses purity 28.57) | 92.381 % |
| Virtual molasses purity | 45.086 % |
| Reduced BHR to 85 juice purity (Noël Deerr) | 85.511 % |
Open this example in the calculator and change any input.
Formula
\(BHR = \frac{Pol_S\,R}{Pol_{MJ,c}}, \quad BBHR = \frac{J - 0.2857}{J\,(1 - 0.2857)}\)
\(M_v = \frac{J (1 - BHR)}{1 - BHR\,J}, \quad R_{85} = \frac{0.85 - M_v}{0.85\,(1 - M_v)}\)
Variables
| Symbol | Meaning | SI unit |
|---|---|---|
| \(J\) | Mixed juice purity | - |
| \(Pol_{MJ,c}\) | Pol in mixed juice % cane | - |
| \(R\) | Sugar made % cane (recovery) | - |
| \(Pol_S\) | Pol % sugar | - |
| \(BHR\) | Actual boiling house recovery | - |
| \(BBHR\) | Basic BHR (molasses purity 28.57) | - |
| \(M_v\) | Virtual molasses purity | - |
| \(R_{85}\) | Reduced BHR to 85 juice purity (Noël Deerr) | - |
Method and standards
Recovery definitions.
Where it is used
- Boiling house performance reports.
- Inter-factory comparison.
Common mistakes
- Using clear juice pol for mixed juice.
- Percent and fraction mixed.
Assumptions and limits
- Purities as fractions.
- The actual BHR uses the measured pol of the sugar, while M_v and R85 follow the standard form, which takes the sugar as pure (purity 100); the two bases are mixed as in the DMR practice.
- A note appears when M_v exceeds 85 (negative R85) or the actual BHR is far below the basic BHR.
References
- Basic BHR = 100 (J − 28.57)/[J (100 − 28.57)]
- Noël Deerr reduced BHR: R85 = 100 (85 − Mv)/[85 (100 − Mv)]
- Mv = 100 J (1 − R)/(100 − R J)
- Sugar factory chemical control (daily manufacturing report) definitions
- as compiled in SugarProcessTech
- Formulas for calculating sugar industry DMR
Questions and answers
What is basic BHR?
The recovery the juice would give with a final molasses purity of 28.57, a fixed reference.
Why reduce BHR to 85 purity?
Higher juice purity gives higher recovery for the same work; reducing removes it.
What is virtual molasses purity?
The molasses purity that would explain the recovery actually achieved.
Method and article reviewed by FireCAD engineering on 13 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.