FireCADCalc

Solar Position at Noon, Incidence on a Tilted Panel and Suggested Tilt

Solar declination for a day, noon sun altitude, noon incidence angle on a tilted equator-facing panel, and the tilt facing the noon sun.

Thermal power plantProcess steam and utilitiesSugar mill and cogenerationChemical and fertiliserPulp and paperFood, dairy and textile

Inputs

Examples: 19° N on 21 June, tilt 19°28.6° N on 21 December, tilt 28.6°33.9° S, 1 March, tilt 30°

Results

Cooper's declination formula; panel faces the equator. For fixed panels, tilt near the latitude maximises annual yield; flatter favours summer, steeper winter.

Solar declination-23.450°
Sun altitude at solar noon37.950°
Incidence angle on the panel at noon23.450°
Beam factor cos θ0.91741
Tilt facing the noon sun on this day52.050°

Download PDF CSV Link to this result Compare another case

Log in to save calculations to your dashboard.

Worked example

Example: 19° N on 21 June, tilt 19°. The inputs, in the units selected above:

InputValue
Latitude (north positive)19.000 °
Day of the year172.00 -
Panel tilt from horizontal19.000 °

Applying the formula below gives:

ResultValue
Solar declination23.450 °
Sun altitude at solar noon85.550 °
Incidence angle on the panel at noon23.450 °
Beam factor cos θ0.91741
Tilt facing the noon sun on this day4.4498 °

Open this example in the calculator and change any input.

Formula

\(\delta = 23.45°\sin\left(360°\frac{284 + n}{365}\right), \quad \alpha_n = 90° - |\varphi - \delta|, \quad \theta_i = |\varphi - \beta - \delta|\ \text{(northern hemisphere, noon)}\)

\(\theta_i = |\varphi + \beta - \delta|\ \text{(southern hemisphere, panel facing north, noon)}, \quad \beta_{noon} = |\varphi - \delta|\)

Variables

Symbol Meaning SI unit
\(\varphi\) Latitude (north positive) rad
\(n\) Day of the year -
\(\beta\) Panel tilt from horizontal rad
\(\delta\) Solar declination rad
\(\alpha_n\) Sun altitude at solar noon rad
\(\theta_i\) Incidence angle on the panel at noon rad
\(\cos\theta_i\) Beam factor cos θ -
\(\beta_{noon}\) Tilt facing the noon sun on this day rad

Method and standards

Solar geometry.

Where it is used

  • Fixed PV and solar thermal tilt choice.
  • Row spacing and shading checks.

Common mistakes

  • Using magnetic south.
  • Applying noon geometry to all-day yield.

Assumptions and limits

  • Solar noon; equator-facing panel (south-facing in the northern hemisphere, north-facing in the southern, with latitude negative).
  • Latitude must lie between −90° and 90° and tilt between 0° and 90°.

References

  • Cooper's declination δ = 23.45° sin(360(284 + n)/365) and solar-noon geometry (Duffie and Beckman, Solar Engineering of Thermal Processes)

Questions and answers

Why tilt at latitude?

It points the panel at the average noon sun over the year.

What is declination?

The sun's angle north or south of the equator: +23.45° at the June solstice, −23.45° in December.

What do the defaults represent?

Latitude 19° N (Mumbai) on 21 June with the panel at 19° tilt.

Method and article reviewed by FireCAD engineering on 13 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.

Related calculators

Free engineering calculators: every page computes in SI and converts to your units. Results are for engineering estimation; verify critical designs against the referenced standards.

Rejoining the server...

Rejoin failed... trying again in seconds.

Failed to rejoin.
Please retry or reload the page.

The session has been paused by the server.

Failed to resume the session.
Please retry or reload the page.