Worked example
Example: Chimney: 40° and 25°, stations 30 m apart. The inputs, in the units selected above:
| Input | Value |
|---|---|
| Distance between the two stations | 30.000 m |
| Vertical angle from the near station | 40.000 ° |
| Vertical angle from the far station | 25.000 ° |
| Reduced level of the instrument axis (both stations) | 100.00 m |
Applying the formula below gives:
| Result | Value |
|---|---|
| Horizontal distance from the near station | 37.526 m |
| Height above the instrument axis | 31.488 m |
| Reduced level of the point | 131.49 m |
Open this example in the calculator and change any input.
Formula
\(D = \frac{b\tan\alpha_2}{\tan\alpha_1 - \tan\alpha_2}, \quad h = D\tan\alpha_1\)
Variables
| Symbol | Meaning | SI unit |
|---|---|---|
| \(b\) | Distance between the two stations | m |
| \(\alpha_1\) | Vertical angle from the near station | rad |
| \(\alpha_2\) | Vertical angle from the far station | rad |
| \(RL_i\) | Reduced level of the instrument axis (both stations) | m |
| \(D\) | Horizontal distance from the near station | m |
| \(h\) | Height above the instrument axis | m |
| \(RL\) | Reduced level of the point | m |
Method and standards
Trigonometry.
Where it is used
- Chimney and tower heights.
- Exam problems.
Common mistakes
- Stations not in line with the object.
- Mixing up near and far angles.
Assumptions and limits
- Same instrument level; short sights.
References
- Trigonometric levelling
- base inaccessible
- stations in line (Punmia, Surveying, vol. 1–2 (Laxmi), vol. 2)
Questions and answers
Why two stations?
When the base of the object cannot be reached, its distance is unknown; two angles over a measured base give both distance and height.
What if the instrument heights differ?
Then the formula needs the height difference term; set both stations at the same axis level where possible.
What do the defaults represent?
Angles of 40° and 25° to a chimney top from stations 30 m apart.
Method and article reviewed by FireCAD engineering on 13 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.