FireCADCalc

Curvature and Refraction Correction in Levelling

Curvature and refraction corrections to a levelling staff reading at a sight distance, the combined correction and the visible horizon.

Thermal power plantProcess steam and utilitiesSugar mill and cogenerationRefinery and petrochemicalChemical and fertiliserPulp and paper

Inputs

Examples: 1 km sight, standard refractionRiver crossing 3 km, eye at 30 m

Results

With k = 1/7 and R = 6,370 km the combined correction is 0.0673D² m (D in km). Equal fore and back sights cancel both corrections in ordinary levelling.

Curvature correction (subtract)706.44mm
Refraction correction (add)100.92mm
Combined correction (subtract)605.52mm
Distance to the visible horizon21.116km

Download PDF CSV Link to this result Compare another case

Log in to save calculations to your dashboard.

Worked example

Example: 1 km sight, standard refraction. The inputs, in the units selected above:

InputValue
Sight distance1.0000 km
Earth radius6,370.0 km
Refraction as a fraction of curvature0.14286 -
Observer eye height (for horizon)1.6000 m

Applying the formula below gives:

ResultValue
Curvature correction (subtract)78.493 mm
Refraction correction (add)11.213 mm
Combined correction (subtract)67.280 mm
Distance to the visible horizon4.8766 km

Open this example in the calculator and change any input.

Formula

\(C_c = \frac{D^2}{2R}, \quad C_r = k\frac{D^2}{2R}, \quad C = (1 - k)\frac{D^2}{2R} \approx 0.0673D^2\ \mathrm{m}\ (D\ \mathrm{in\ km})\)

Variables

Symbol Meaning SI unit
\(D\) Sight distance m
\(R\) Earth radius m
\(k\) Refraction as a fraction of curvature -
\(h\) Observer eye height (for horizon) m
\(C_c\) Curvature correction (subtract) m
\(C_r\) Refraction correction (add) m
\(C\) Combined correction (subtract) m
\(D_h\) Distance to the visible horizon m

Method and standards

Geometry of the earth's curve.

Where it is used

  • Long sights across rivers and valleys.
  • Exam problems on visibility.

Common mistakes

  • Adding instead of subtracting.
  • Ignoring refraction variability near the ground.

Assumptions and limits

  • Spherical earth; standard refraction.

References

  • Curvature D²/2R and refraction k·D²/2R (Punmia, Surveying, vol. 1–2 (Laxmi), vol. 1, ch. 8)

Questions and answers

Why does refraction reduce the correction?

Light bends down towards the denser air near the ground, partly following the earth's curve.

When can I ignore it?

For balanced sights under 100 m the effect is a fraction of a millimetre.

What do the defaults represent?

A 1 km sight with standard refraction and a 1.6 m eye height.

Method and article reviewed by FireCAD engineering on 13 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.

Related calculators

Free engineering calculators: every page computes in SI and converts to your units. Results are for engineering estimation; verify critical designs against the referenced standards.

Rejoining the server...

Rejoin failed... trying again in seconds.

Failed to rejoin.
Please retry or reload the page.

The session has been paused by the server.

Failed to resume the session.
Please retry or reload the page.