Worked example
Example: 230° and 75°. The inputs, in the units selected above:
| Input | Value |
|---|---|
| Whole-circle bearing of line 1 | 230.00 ° |
| Whole-circle bearing of line 2 | 75.000 ° |
Applying the formula below gives:
| Result | Value |
|---|---|
| Reduced bearing of line 1 (angle from N or S) | 50.000 ° |
| Quadrant (1 NE, 2 SE, 3 SW, 4 NW) | 3.0000 |
| Back bearing of line 1 | 50.000 ° |
| Included angle between the lines | 155.00 ° |
Open this example in the calculator and change any input.
Formula
\(BB = WCB \pm 180^\circ, \quad RB = \begin{cases}WCB & 0\text{–}90^\circ\\180^\circ - WCB & 90\text{–}180^\circ\\WCB - 180^\circ & 180\text{–}270^\circ\\360^\circ - WCB & 270\text{–}360^\circ\end{cases}\)
Variables
| Symbol | Meaning | SI unit |
|---|---|---|
| \(\theta_1\) | Whole-circle bearing of line 1 | rad |
| \(\theta_2\) | Whole-circle bearing of line 2 | rad |
| \(RB_1\) | Reduced bearing of line 1 (angle from N or S) | rad |
| \(\text{quadrant}\) | Quadrant (1 NE, 2 SE, 3 SW, 4 NW) | - |
| \(BB_1\) | Back bearing of line 1 | rad |
| \(\alpha\) | Included angle between the lines | rad |
Method and standards
Bearing conventions.
Where it is used
- Compass and theodolite traverses.
- Exam problems.
Common mistakes
- Forgetting to wrap back bearing past 360°.
- Mixing magnetic and true bearings.
Assumptions and limits
- Plane surveying.
References
- Bearing conventions (Punmia, Surveying, vol. 1–2 (Laxmi), vol. 1, compass surveying)
Questions and answers
How is a reduced bearing written?
As N or S, angle, E or W: e.g. S 50° W for a whole-circle bearing of 230°.
What is a back bearing?
The bearing of the same line taken from the other end: the fore bearing ± 180°.
What do the defaults represent?
Lines with whole-circle bearings of 230° and 75°.
Method and article reviewed by FireCAD engineering on 13 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.